This is driving me nuts. And I'm sure my question has been previously answered in the multiple forums
In 2006 we sailed across the Pacific to Australia
and used sailmail and GetFax with a ICOM
800 and Pactor modem
IIe - no issues.
We no longer belong to Sailmail- not doing enough cruising to warrant it unfortunately.
So have downloaded JV Comm. Windows 7 - plugged in my PactorIIe to the appropiate port (via RS323 cable) - I have a green light on my Pactor
Fax/SSTV - a good signal on the Icom
and I think my settings in the JV Comm programme are all wrong.
The attached image was with Baud 115200 and 11025 Data rate
Can I please get some help with the required settings.