Open Source Raymarine Autopilot Remote Control

[nauti-control]

I noticed a few posts about raymarine autopilots and thought i'd advertise my project . Its an open source hardware/software design for a remote control for Raymarine Auto pilots .

It uses a 433mhz remote as well as a web interface that you can connect your phone to . This allows your phone to be also used as a remote as well as mapping buttons.

The firmware is upgradeable and development is on going. I am currently working on a TCPIP NMEA translater that'll take things like wind speed , speed through water etc and convert it to nmea sentences for use in Open CPN. It's partially there but still working on it and

Visit my website
https://nauti-control.com/nauti-cont...te-controller/

or my Github
https://github.com/nauti-control/STWirelessRemote

Fully open source though i am selling some items on my homepage such as PCB's / Premade boxes.

Will be posting some demo videos and tutorials over the coming weeks on the website so keep an eye out.

Works with all auto pilots that use classic Seatalk interface.

ST4000,ST4000+,ST5000,ST5000+,ST6000,ST6000+,ST600 1,ST6001+,ST6002,ST6002+,ST7000,ST7000+,ST7001+,ST 7002,ST7002+,ST8001,ST8001+,ST8002,ST8002+RayPilot 650

ST1000,ST1000+,ST2000,ST2000+

ST3000,ST4000,ST5000,ST6000,ST7000,Autohelm Sport pilot,Autohelm Sport pilot +

Type 100,Type 300,Type 150,Type 400,S1000,Sport pilot,sport pilot +,Smartpilot: S1,S1G,S2,S2G,S3,S3G,SP1,SPX5,SPX10 ,SPX30,SPX40,ST70P

ST60 Speed + Tri Data Displays (Timer)

Hopefully of use to some in here !