Moody 56 rigging help

[OndinePLC]

I am re-riggingf a Moody 56 cutter and need information about the arrangement of the running backstays and the roller furling drum lines.


There are a pair of turning blocks and a rope clutch on each side of the cockpit coaming below the winches which i suspect are for for the runner tails and/or the RF drum lines. I would appreciate any information from someone familiar with this set-up.


See photo attttached below.


---------------------------------------------------------------------------------


True sailing adventures by Cris Roinson:
"A Small Slip" and "Desperate Deliveries"
Available as ebooks and paperbacks from Amazon Kindle.