|
27-07-2016, 12:53
|
#1
|
Registered User
Join Date: Aug 2015
Location: Port Townsend, WA
Boat: Tashiba-31
Posts: 481
|
How to test vented loops
Probably obvious, but how do you test a vented loop to see if it's plugged?
|
|
|
27-07-2016, 12:55
|
#2
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: How to test vented loops
Blow in it.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
27-07-2016, 12:56
|
#3
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: How to test vented loops
In case this part isn't obvious, if the vented loop is on the head discharge I would connect a hose to the loop and blow into the hose.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
27-07-2016, 13:37
|
#4
|
Registered User
Join Date: Feb 2013
Location: Oregon
Boat: Seafarer36c
Posts: 5,563
|
Re: How to test vented loops
Are thinking about the little valve in the vented loop? You can take it out and inspect it.
|
|
|
27-07-2016, 14:05
|
#5
|
Marine Service Provider
Join Date: Feb 2011
Posts: 3,035
|
Re: How to test vented loops
Quote:
Originally Posted by Guy
Are thinking about the little valve in the vented loop? You can take it out and inspect it.
|
And clean it while it's out...or, if it's got some age on it, replace it.
If there's a vent line on the top of the loop instead of a valve, you can bet the farm that the line is blocked at the connection. Remove the vent line and replace it with an air valve.
|
|
|
27-07-2016, 14:23
|
#6
|
Registered User
Join Date: Aug 2006
Location: Skagit City, WA
Posts: 25,587
|
Re: How to test vented loops
Yes, just clean the valve. Based on my experience with vented loops with a valve in salt water or head discharge, most are not working most the time.
__________________
"I spent most of my money on Booze, Broads and Boats. The rest I wasted" - Elmore Leonard
|
|
|
27-07-2016, 14:34
|
#7
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: How to test vented loops
Quote:
Originally Posted by peghall
And clean it while it's out...or, if it's got some age on it, replace it.
If there's a vent line on the top of the loop instead of a valve, you can bet the farm that the line is blocked at the connection. Remove the vent line and replace it with an air valve.
|
Hi Peg,
I thought I understood vented loops but now I'm a bit confused. By air valve do you mean the little gadget at the top of the loop that has a little diaphragm inside and is a one way valve, similar to a flapper valve but the circular diaphragm is attached in the center of the circle with vent holes around the perimeter?
I thought all vented loops had that or something like it that close when pressure is inside the loop but vent air into the loop when the pressure is released so prevent siphoning. At least all of them I've dealt with work this way.
Some do have a hose barb on the end as well and, since most of them drip a bit, depending on the location of the loop I'll put a hose on the barb and run the drip away from sensitive spots like wiring, equipment, etc.
So is there some different kind of vented loop without an air valve or do I misunderstand what an air valve is?
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
27-07-2016, 14:35
|
#8
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: How to test vented loops
Quote:
Originally Posted by Cheechako
Yes, just clean the valve. Based on my experience with vented loops with a valve in salt water or head discharge, most are not working most the time.
|
Same experience here.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
27-07-2016, 15:07
|
#9
|
Marine Service Provider
Join Date: Feb 2011
Posts: 3,035
|
Re: How to test vented loops
By air valve do you mean the little gadget at the top of the loop that has a little diaphragm inside and is a one way valve, similar to a flapper valve but the circular diaphragm is attached in the center of the circle with vent holes around the perimeter?
Yup...that's what an air valve is...and they do require a little maintenance and replacement when the diaphragm in 'em wears out. Most PVC vented loops don't have an integral air valve, they have just a little nipple on top that the air valve threads into. (see photo for an example) Because air valves are replaceable, they're almost always sold separately...which means that neither the puppies who now work in marine stores know they exist, nor do 90% of owners who are buying vented loops because the installation instructions told 'em they needed 'em.
They don't leak when instilled with a valve that works the way it's supposed to work--closed when liquid is being PUSHED through the loop, open when liquid is being PULLED through it. But they do when installed without one...and because owners don't know they need a valve, they put a line on 'em that they tee into the holding tank vent line or even install a thru-hull for 'em. But that line is so small--only 1/4"--that it very quickly becomes clogged at the loop with salt, sea water minerals--and if in a toilet discharge line--waste...turning the loop into an UNvented loop that no longer has any ability to break a siphon. Because the hose solved the drip/squirt problem, it's "out of sight-out of mind" so it's rarely if ever cleaned. In fact OP to this thread is the first person I've ever seen or heard even ask if the loop is still working.
|
|
|
27-07-2016, 15:09
|
#10
|
Registered User
Join Date: Feb 2013
Location: Oregon
Boat: Seafarer36c
Posts: 5,563
|
Re: How to test vented loops
Quote:
Originally Posted by skipmac
Hi Peg,
I thought I understood vented loops but now I'm a bit confused. loop I
So is there some different kind of vented loop without an air valve or do I misunderstand what an air valve is?
|
It's just like a tiny joker valve.
|
|
|
27-07-2016, 15:17
|
#11
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: How to test vented loops
Quote:
Originally Posted by peghall
By air valve do you mean the little gadget at the top of the loop that has a little diaphragm inside and is a one way valve, similar to a flapper valve but the circular diaphragm is attached in the center of the circle with vent holes around the perimeter?
Yup...that's what an air valve is. Most PVC vented loops don't have an integral air valve, they have just a little nipple on top that the air valve threads into. Because air valves are replaceable, they're almost always sold separately...which means that neither the puppies who now work in marine stores know they exist, nor do 90% of owners who are buying vented loops because the installation instructions told 'em they needed 'em.
They don't leak when instilled with a valve that works the way it's supposed to work--closed when liquid is being PUSHED through the loop, open when liquid is being PULLED through it. But they do when installed without one...and because owners don't know they need a valve, they put a line on 'em that they tee into the holding tank vent line or even install a thru-hull for 'em. But that line is so small--only 1/4"--that it very quickly becomes clogged at the loop with salt, sea water minerals--and if in a toilet discharge line--waste...turning the loop into an UNvented loop that no longer has any ability to break a siphon. Because the hose solved the drip/squirt problem, it's "out of sight-out of mind" so it's rarely if ever cleaned. In fact OP to this thread is the first person I've ever seen or heard even ask if the loop is still working.
|
People have a vented loop and don't know that an air valve goes in the top and just leave a hole there???? Once again I have been surprised at what seems to be a common lack of knowledge of basic boat systems.
The vented loop in the raw water cooling hose in my boat I have cleaned and replaced the air valve repeatedly and it always drips a little. It's a bronze Groco loop and I've found most Groco products to be reasonably well designed and manufactured. The problem is the only practical place to mount the loop is over the back of the engine and the PO just let it drip, resulting a huge rust problem. If there's a trick I haven't tried for preventing a drip or a better brand loop I'm all ears.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
27-07-2016, 15:23
|
#12
|
Registered User
Join Date: Aug 2006
Location: Skagit City, WA
Posts: 25,587
|
Re: How to test vented loops
To me the best case scenario is a hose barb on top of the loop, for the biggest hose possible 3/8 or even 1/2 maybe, then the joker valve a couple feet, or more, above that. I would think that would keep it operational longer. :>)
Some have an enclosed valve, some have a rubber disc, some have a brass and rubber disc.
__________________
"I spent most of my money on Booze, Broads and Boats. The rest I wasted" - Elmore Leonard
|
|
|
27-07-2016, 15:50
|
#13
|
Senior Cruiser
Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
|
Re: How to test vented loops
Quote:
Originally Posted by Cheechako
To me the best case scenario is a hose barb on top of the loop, for the biggest hose possible 3/8 or even 1/2 maybe, then the joker valve a couple feet, or more, above that. I would think that would keep it operational longer. :>)
Some have an enclosed valve, some have a rubber disc, some have a brass and rubber disc.
|
That sounds like a worthwhile modification to investigate. The nice, bronze Groco vented loop in my raw water line has a tiny little rubber disk. Haven't looked at it recently but as I recall it's only 1/2-3/4" diameter so not hard to get just a little salt crystal or piece of trash in the seating area to allow a leak.
What I've done so far is keep the valve as clean as possible but also run a drain hose to the bilge to reroute the inevitable leaks.
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Advertise Here
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
Vendor Spotlight |
|
|
|
|
|