|
|
26-12-2010, 02:30
|
#16
|
Moderator
Join Date: Aug 2009
Location: Solent, England
Boat: Moody 31
Posts: 18,476
|
We had this on a previous power boat. To make matters worse the shower drain leaked so the aluminium tank constantly sat in a pool of water in the bilge. Also contributing was the wires to the shower pump were also under the bilge water and only crimped with car connectors.
Took the tank out only to find all that horrible white stuff inside and then dozens of tiny pin holes in the tank when I pressure washed it out. I was going to try and repair the tank but gave up and replaced it with a flexible tank. It might not have lasted as long but was cost effective.
Plastic fuel and water tanks every time for me.
Pete
|
|
|
26-12-2010, 03:02
|
#17
|
CF Adviser Moderator Emeritus
Join Date: Sep 2007
Location: Virginia
Boat: Island Packet 380, now sold
Posts: 8,942
|
Quote:
Originally Posted by gettinthere
Hud
How much water could you treat with one filter? How often did you change filters?
Thanks for this info.
|
The activated carbon in the filter will last a long time, but it depends on how much chlorine is in the water that passes through it, and how many gallons of water you treat per year. I'd suggest you change the filter once a year whether it needs it or not. They'd probably last several years for most folks, but they're cheap.
My tank was the 5083 alloy, but it still corroded. Not enough to make me worry about it failing, but enough to be an irritation because of the periodic clogging of the pump screen and faucet aerators.
__________________
Hud
|
|
|
26-12-2010, 04:33
|
#18
|
Registered User
Join Date: Aug 2008
Location: New Mexico and Puerto Rico
Boat: Sunbeam, 37, Ziamar
Posts: 300
|
First, aluminum was implicated in Alzheimer's many years ago because there were some cases where high levels of aluminum were found in Alzheimer's patients. Well, correlation isn't causation! And, that theory is no longer believed. But the urban legend lives on.
There are a bunch of threads on the board about using peroxide as a disinfectant. Here are a few of them.
http://www.cruisersforum.com/forums/...ing-37393.html
http://www.cruisersforum.com/forums/...nks-31690.html
http://www.cruisersforum.com/forums/...nks-42267.html
I'm getting about ready for a major cleaning of my freshwater system and have been looking for food grade (35%) hydrogen peroxide on the internet. It's definitely available by mail. At that concentration, I'd be pretty careful in handling it. Wear rubber gloves, long sleeves, goggles. One good thing about hydrogen peroxide is that the final products, after cleaning are water and oxygen (in very small amounts so not dangerous unless you are trying to make rocket fuel in your closet). There is a potential for some oxidation of rubber parts in the system but I doubt if it's serious. In any case, chlorine bleach is pretty rough on rubber, too.
Peggy Hall (The Headmistress) is the source of all information about marine water systems!! Here's a link to an old version of her advice. There is some discussion of whether she still approves of this link.
the boatbuilding.community - Marine Sanitation: Fact vs. Folklore
And here's another link to one that she wrote in 2003.
http://home.online.no/~lha-h/forum/phall.pdf
And finally, you can purchase her book:
Amazon.com: Get Rid of Boat Odors: A Boat Owners Guide to Marine Sanitation Systems and Other Sources of Aggravation and Odor (9781892399151): Peggie Hall: Books
Get Rid of Boat Odors
If anyone has read it or has a copy, I'd like to get a review. I'm thinking of buying one.
Bill
__________________
Don't believe everything you think
|
|
|
26-12-2010, 08:39
|
#19
|
Marine Service Provider
Join Date: Oct 2007
Boat: Endeavour 42CC
Posts: 1,182
|
thanks Hud, we'll implement your idea in the spring
|
|
|
26-12-2010, 10:33
|
#20
|
Registered User
Join Date: Oct 2010
Location: SW Norway
Boat: Nidelv 28, 28ft
Posts: 247
|
In general, if you have corrosion in an aluminium tank, it's not a suitable alloy of aluminium that has been used to build it.
If you get a clogged filter due to corrosion, you have not just a bit of corrosion but more like an infection, there is no use in trying to rinse that out. It will just continue until you have a sieve of a tank.
If you use a coalfilter you need to replace this every year, no matter how many liters that run trough it... After a short while bacterias will grow in it - the filters has been tested and discussed in may labs around the world.
The only filters that has been proven good cost a small fortune, but last only for a few months after opened from the sealed container.
Why do you think that big vessels with alu tanks coat the inside of the tank with a type of concrete to make sure that the water does not get contaminated by the alu? This goes also for the vessels with ordinary steel tanks (not stainless steel).
|
|
|
28-12-2010, 16:26
|
#21
|
Senior Cruiser
Join Date: Jan 2010
Location: PORTUGAL
Posts: 30,652
|
I don't know about chlorine treatment... never given it much of a thought but I do know from experience that mains water in the States is pretty crap by EU standards...
When I filled my tanks in NC after two weeks it started sprouting fungus... yuuk.. anyway I did what I normally do in the Carib and other places I'm unsure of the quality... a couple of capfuls of plain household bleach per tank.. or white vinegar..... sterilizes it a treat...
Every time I came out of the B/yard shower I smelt like I'd been swimming in the Neuse...
__________________
You can't beat a people up (for 75yrs+) and have them say..
"I Love You.. ". Murray Roman.
Yet the 'useful idiot' of the West still pays for the beat of the Apartheid Drum.
|
|
|
16-01-2011, 21:30
|
#22
|
Registered User
Join Date: Aug 2010
Posts: 4
|
I have read that chlorine dioxide is suitable for disinfecting aluminum tanks as it does not react with aluminum the way chlorine does. I cant seem to find quantities large enough to do my tank. It is sold as a disinfectant that hikers use to make water safe to drink.It is also used commercially to clean large aluminum tanks.Any one have any experience with it.
|
|
|
28-01-2011, 11:24
|
#23
|
Registered User
Join Date: May 2010
Location: Elsewhere on the Water
Posts: 579
|
If it is due to biological activity bleach would be an answer. 5000l would take a lot of it, perhaps ten to twelve gallons. If there is an access panel you could empty it and scrub it down with a brush and bleach.
If the problem is hydrogen sulfide in your water source this will not help.
|
|
|
08-02-2012, 06:49
|
#24
|
Registered User
Join Date: Feb 2012
Posts: 3
|
Re: Aluminum Water Tank Corrosion ?
My aluminum hot water tank exhibits a very stong chemical odor, a little like formaldehyde. This odor is not at all evident at the cold water taps. The boat is new to me with the previous owner not available so I have no idea if the odor existed before I changed out the 120 VAC element to a 100 watt VDC element. No aluminum oxide granules have been noticied despite use of chlorinated water, but the acrid chemical order is worrisome. Any thoughts on the cause? Thanks
|
|
|
08-02-2012, 07:31
|
#25
|
Registered User
Join Date: Aug 2008
Location: New Mexico and Puerto Rico
Boat: Sunbeam, 37, Ziamar
Posts: 300
|
Re: Aluminum Water Tank Corrosion ?
I wouldn't think that the aluminum and aluminum salts would have much detectable odor. I wonder if the warm (hot) water is dissolving some plasticizer or other component from some of your "rubber" or plastic tubing in the hot water system. You might try checking through your entire hot water system, following the tubing to see if there are any parts that might "off gas". I know that a lot of people use inappropriate components so you might have some tubing that is not designed for hot, potable water.
Although I know I have an aluminum water holding tank, I'd never thought much about my hot water tank. I'll have to check it out now. But, of course, filtering my water and not using chlorine compounds in my water system should protect it in any case.
__________________
Don't believe everything you think
|
|
|
08-02-2012, 08:39
|
#26
|
Registered User
Join Date: Feb 2012
Posts: 3
|
Re: Aluminum Water Tank Corrosion ?
Thanks for the response. All of my hoses are type suitable for potable water. The only thing that I have changed is the 120VAC element to a 12VDC element to be able to use the excess amps from a large solar panel. My initial thought was that high heat was causing some chemical reaction, but it has been cloudy for the last several days resulting in only slightly warm water, but the same odor. No odor exists at the cold taps.
Maybe I will pull the new element and stick in a pan of the same water to see if an odor develops!
|
|
|
16-09-2015, 22:30
|
#27
|
Registered User
Join Date: Feb 2006
Posts: 2,772
|
Re: Aluminum Water Tank Corrosion ?
OK OK OK! I have 2 110 gallon tanks in my Brewer 12.8 sloop. I removed the inspection plates (previous owner says he never did in 12years). There were white discs attached to the aluminum everywhere. I thought they were calcium deposits. Then I thought they were mold! eek They were from 1.5"dia to 5/8Dia and from 1/8 thick in center to 1/2 thick. When scraping off the larger ones it left a small 1/16 to 1/4 dia. 'dent ' in the aluminum right in the center. So we scraped the entire aluminum surfaces as much as possible and fortunately the access plates and the baffles were in a position to allow reaching almost all of the interior surfaces. Then we rolled and brushed 3 heavy coats of epoxy 1:1 from clear coatings and a fillet on the bottom welds of SuperBond epoxy glue (between coats) also from Clear Coatings. Now I am afraid to put bleach bach into tanks. Would white vinegar help? Thanks, George
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Advertise Here
Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
Vendor Spotlight |
|
|
|
|
|