Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 11-02-2016, 13:47   #16
Registered User
Cadence's Avatar

Join Date: Dec 2008
Location: SC
Boat: None,build the one shown of glass, had many from 6' to 48'.
Posts: 6,750
Re: Help me identify these gadgets

Originally Posted by Blue Stocking View Post
DelCo-Remy alternator parts. Big bearing at front, near to fan.Grease cup for rear of rotor. Grey thing is brush cage with retainer pin thru brushes to hold them back against spring pressure. When assembled, that wire ( normally a straightened paperclip works best ) project out thru a crescent shaped hole in the alternator backplate. Put the pin when assembly is complete and brushes engage slip rings on the rotor. The arm projecting attaches to the regulator, or the diode bridge. Been a while, cant quite remember.
Sounds like a knowledgable reply.

Cadence is offline   Reply With Quote
Old 11-02-2016, 14:11   #17
Registered User
mynameismud's Avatar

Join Date: Jun 2015
Location: New Jersey
Boat: Aquarius 23' and a 17' Kit bass boat
Posts: 49
Re: Help me identify these gadgets

4 and 5 are both bearings. The 6203 is common in electrical motors. I've replaced many of that number being a sealed 2RS bearing I'd suggest if you use it gently used a pick pull the seal off and add some grease to it to prolong life.

The cup on 4 and 5 is also a bearing. I see the little needles in there. Possible for the end of something. Keep a eye out for something looking similar that has a spinning shaft.

mynameismud is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Identify this/these boats marktre Monohull Sailboats 4 03-09-2015 22:02
Identify these Boats (2 Ketch, 1 Sloop) GordonCC General Sailing Forum 11 14-07-2013 14:32
Help Me Identify These Snaps SVNeko Construction, Maintenance & Refit 5 06-07-2013 14:08
Can Anyone Identify these Winches ? Rigamorand Deck hardware: Rigging, Sails & Hoisting 1 19-11-2011 04:14
Identify these Appendages Charlie Construction, Maintenance & Refit 11 09-04-2011 00:20

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 02:52.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.