Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Rate Thread Display Modes
Old 09-09-2012, 11:42   #1
Registered User

Join Date: Mar 2011
Posts: 253
Replacing Injector Gasket Washer

Hello,

My middle injector on a universal diesel has been leaking soot out of the housing around the threads. I got a new injector thinking that may be the problem, but I now suspect the gasket might just be worn?

I have a new gasket washer, but am having trouble getting the old one out. Any tricks or special tools that might do the trick?

Also, I would like to clean up the block where I have carbon build up around the injector, but don't want anything to fall into the cylinder. What works well to plug the hole while the nozzle holder and injector is out?
__________________
shamrock is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 20:35.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.