Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 09-03-2015, 07:47   #1
Registered User

Join Date: Mar 2010
Location: West coast FL
Posts: 25
Cheap Zinc puller

Often zincs get hard to remove. The brass comes out but the zinc is stuck inside the cooler. I use an all thread coupling nut of the thread size as the zinc. Screw it in and wiggle it around with pliers and soon enough you can pull the old zinc. Grinding off the points on the nut adds clearance.

Here is a link to all thread coupler nuts if folks don't recognize the term.
BruM is offline   Reply With Quote


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Internal Cutlass Bearing Puller Chief Engineer Propellers & Drive Systems 28 21-02-2018 10:35
For Sale: Propsmith Prop Puller and Installer athames Classifieds Archive 1 03-08-2013 10:11
Want To Buy: Need a Cheap, Cheap, Cheap Boat . . . Did I Mention Cheap ? TheScarab Classifieds Archive 52 05-02-2012 12:29
Need recommendation for a prop puller? Ziggy Propellers & Drive Systems 6 09-04-2009 19:44
jabsco impeller puller bobsadler Engines and Propulsion Systems 7 29-08-2008 19:31

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 15:18.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.