CAV / DPA-Type Rotational Fuel Pumps

[digby]

I was wondering if anyone knew where to locate blowup drawing, instruction manual, shop service manul or anything pertinent to these pumps. Any info would be appreciated.

[never monday]

CAV pump's aren't that difficult for an experienced pump shop. It's not something to try on your own.

[GordMay]

Greetings and welcome aboard the CF, Digby.

Check out "FUEL INJECTION INFORMATION"
➥ http://www.oldengine.org/members/die...tion/fuel1.htm

Including "CAV Information - Injection Pumps"
➥ http://www.oldengine.org/members/die...tion/fuel1.htm

[digby]

Originally Posted by GordMay

Greetings and welcome aboard the CF, Digby.

Check out "FUEL INJECTION INFORMATION"
➥ http://www.oldengine.org/members/die...tion/fuel1.htm

Including "CAV Information - Injection Pumps"
➥ http://www.oldengine.org/members/die...tion/fuel1.htm

THIS IS THE PUMP i AM LOOKING FOR INFO ON.

[Alan B]

Hi,
After looking for a few hours on the internet I did download a maual for the pump.
It's about 20Mb and explains pumps with mechanical and hydraulic governers.
I'm not sure where I found the manual on the net. I ahve looked for it again on the Web but can't find it, so I can't send you the link for it.
I just overhauled the injector pump on my Formosa 41, Perkins 4.108 and it was pretty easy to do yourself. It took about 4 hours.

Send me your e-mail adress and I'll send you the manaul.
I just hope this site notifies you of my e-mail address?

Cheers
Alan B