Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > The Fleet > Multihull Sailboats
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 27-09-2006, 20:38   #16
Registered User
 
cat man do's Avatar

Join Date: Aug 2006
Location: Brisbane Australia [until the boats launched]
Boat: 50ft powercat, light,long and low powered
Posts: 4,409
Images: 36
Hey schoonerdog,I've used lexan before and it's incredibly soft[probably why its strong]. Is this "margard" a new breed that resists scratches????

Also Shinkolite was used on a 100 + foot motorsailor built by LLoyds Ships in Brisbane a few years back for their windows. I scored some full sheets with corner damage that had been written off by insurance company, figured if good enough for million dollar boys for a boat done to Det Norske Veritas standards,it should be good enough for me. Has,nt let us down yet.

It's not that cheap stuff that goes purple and crazes if thats what you had mistaken it for.

Have fun

Dave
cat man do is offline   Reply With Quote
Old 27-09-2006, 21:11   #17
Registered User

Join Date: Nov 2005
Location: Tasmania
Boat: VandeStadt IOR 40' - Insatiable
Posts: 2,317
Images: 91
I saved weight in my boat by removing about 330 lbs of lead that had been glassed into the bilge just aft of the mast!

One of the things to bear in mind when saving weight, is that not all weight is equal value (for a monohull, anyway). Saving 10 lbs on top of your mast is like saving 100 lbs in your bilges - in terms of stability anyway. So it isn't just a matter of saving weight, but you should think about where you are saving it. It is no good saving a heap of weight in the stern of the boat if it trims you down by the bow.
Weyalan is offline   Reply With Quote
Old 28-09-2006, 03:51   #18
One of Those
 
Canibul's Avatar

Join Date: Sep 2006
Location: Colorado
Boat: Catalac 12M (sold)
Posts: 3,218
I removed 180 lbs from all my boats going forward.....I divorced her.
__________________
Expat life in the Devil's Triangle:
https://2gringos.blogspot.com/
Canibul is offline   Reply With Quote
Old 28-09-2006, 13:47   #19
Registered User

Join Date: May 2003
Location: Caribbean
Boat: 2004 Manta 42 - Perseverance
Posts: 303
You can eliminate the weight and storage space of canned soda with a Soda Club from Boater's World. We make our own soda with this contraption that fizzes the water in one-liter bottles. Then you add the syrup of your choice - they have dozens of flavors. Not only did we eliminate the storage problem, but we don't have the empty cans to deal with as trash. No, I don't own the company. But we really love this product and it has saved us weight, room and trash headaches.
Harriet is offline   Reply With Quote
Old 28-09-2006, 14:22   #20
Registered User
 
cat man do's Avatar

Join Date: Aug 2006
Location: Brisbane Australia [until the boats launched]
Boat: 50ft powercat, light,long and low powered
Posts: 4,409
Images: 36
Hi Harriet, all very nice if you have a watermaker on board, if not you still have to carry the weight to make your soda. Less rubbish is a good thing though

Dave
cat man do is offline   Reply With Quote
Old 29-09-2006, 06:49   #21
Registered User
 
schoonerdog's Avatar

Join Date: May 2004
Location: annapolis
Boat: st francis 44 mk II catamaran
Posts: 1,216
Images: 4
Harriet, I'll definitely add that to my list. A water make does make it possible to have a strategy regarding things. Most of the weight of provisions are from those things which have water in them, cans of soup, cans of soda, bleach. Going with a water maker does allow us to eliminate probably more than half of the weight of provision by going for dried soups, soda fountains, bleach tablets, dried tomatos, beans, etc for cooking. Of course, we always found that the biggest problem was overprovisioning. In every country except for the remotest islands they have fresh produce and most of the time for things like tomatos, cucumbers, onions, etc it's often cheaper than the US.

Cat man do, the margard lexan has a special toughened coating which makes it scratch resistant. It's not as hard as glass but it's close
schoonerdog is offline   Reply With Quote
Old 02-10-2006, 17:40   #22
Registered User
 
44'cruisingcat's Avatar

Join Date: Sep 2006
Posts: 9,398
Images: 69
Pile all the dive gear in the dinghy!
44'cruisingcat is offline   Reply With Quote
Old 09-11-2006, 09:15   #23
Registered User
 
Tnflakbait's Avatar

Join Date: Apr 2006
Location: Southern California
Boat: CSK, 33' Aita Pe'ape'a
Posts: 338
Images: 7
Talking Weight

Sunbrella privacy doors
Led light for less batteries
Aluminium and carbon hardware.
(No extra harware you don't use cluttering the deck)
Cut off excess on all bolts.
Lose some weight
Tnflakbait is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Island Packet 31 for Liveaboard / Offshore? Gray Monohull Sailboats 35 08-05-2022 23:12
Do Boats Have 'Souls' ? sail_the_stars General Sailing Forum 77 14-11-2010 14:25
A Primer on Fiberglass Construction Jeff H Construction, Maintenance & Refit 25 17-11-2005 10:21
Changing the Boat's Name sjs General Sailing Forum 4 24-05-2004 07:15

Advertise Here


All times are GMT -7. The time now is 16:36.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.