Cruisers Forum
 


 
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 15-04-2016, 06:29   #1
Registered User
 
sanibel sailor's Avatar

Join Date: Feb 2013
Location: Ocala FL
Boat: 1979 Bristol 35.5 CB
Posts: 1,964
Westerbeke W60/ Perkins 4-154 Parting Out

Parting out a Westerbeke W60, (same as a Perkins 4-154 I believe). This was just broken in, 7 hrs, then laid up. Rainwater in crankcase, upper end seems good. Have not pulled oil pan yet, so do not know condition of internals, combustion chambers fine.

Heat Exchanger/Cyl head/water pump/fuel injectors/pump, etc.

Located SW Florida, Ft Myers area. Make me an offer on what you need. Supposed to post a price, so how about $20 for the fresh water pump.
__________________
John Churchill Ocala, FL
NURDLE, 1979 Bristol 35.5 CB
Currently hauled out ashore Summerfield FL for refit
sanibel sailor is offline  
Old 15-04-2016, 06:44   #2
Senior Cruiser
 
skipmac's Avatar

Cruisers Forum Supporter

Join Date: Oct 2007
Location: 29° 49.16’ N 82° 25.82’ W
Boat: Pearson 422
Posts: 16,306
Re: Westerbeke W60/ Perkins 4-154 Parting Out

Hi John,

I have a W58 which I have confirmed is a Perkins 4.154 with red paint (and more expensive parts) but other than knowing the model number am not familiar with the pedigree of the W60.

If it is also the same or if it uses some of the same peripherals I would be interested in the water pump">raw water pump.

The one on my W58 I found was a standard Sherwood bronze pump (at half the price of the "official" Westerbeke part).

Not sure how we can determine if the pumps are the same. A photo perhaps or somewhere I think I have the original Sherwood part number I tracked down.

Thanks
Skip
__________________
The water is always bluer on the other side of the ocean.
Sometimes it's necessary to state the obvious for the benefit of the oblivious.
Rust is the poor man's Loctite.
skipmac is offline  
Old 15-04-2016, 06:50   #3
Registered User

Join Date: May 2012
Location: Halifax, NS, Canada
Boat: 47' Steel Roberts Cutter
Posts: 489
Re: Westerbeke W60/ Perkins 4-154 Parting Out

I'd take the injectors if they're in good shape...
NSboatman is offline  
Old 15-04-2016, 06:52   #4
Registered User
 
sanibel sailor's Avatar

Join Date: Feb 2013
Location: Ocala FL
Boat: 1979 Bristol 35.5 CB
Posts: 1,964
Re: Westerbeke W60/ Perkins 4-154 Parting Out

will take detailed pump pics tonight. TOAD Marine give different part numbers
__________________
John Churchill Ocala, FL
NURDLE, 1979 Bristol 35.5 CB
Currently hauled out ashore Summerfield FL for refit
sanibel sailor is offline  
Old 16-04-2016, 08:08   #5
Registered User

Join Date: Dec 2014
Posts: 42
Re: Westerbeke W60/ Perkins 4-154 Parting Out

I have a Wester 58; andwould be interested in any of the peripherals - heat exchanger, etc. Can you send me some pictures? bkreigel@panhandle.rr.com.
Thanks
Bob K
Robert Kriegel is offline  
Old 18-04-2016, 18:59   #6
Registered User

Join Date: Jul 2008
Location: Doing a refit in St Augustine
Boat: 40' Northstar 80/20 S&S ketch
Posts: 59
Send a message via Skype™ to sailinlee
Re: Westerbeke W60/ Perkins 4-154 Parting Out

How much would you want for the injector pump or the heat exchanger. I've got a Perkins 108, but it's called a Westerbeke 454, 1974 original engine. Still runs great.

Thanks,

Lee
sailinlee is offline  
Old 19-04-2016, 08:41   #7
Registered User
 
sanibel sailor's Avatar

Join Date: Feb 2013
Location: Ocala FL
Boat: 1979 Bristol 35.5 CB
Posts: 1,964
Re: Westerbeke W60/ Perkins 4-154 Parting Out

Injectors are sold, fresh water pump and injection lines sold pending payment. Heat exchanger $200, fuel injection pump $250, starter is ugly but works $25, raw water pump with NOS replacement impeller available.
__________________
John Churchill Ocala, FL
NURDLE, 1979 Bristol 35.5 CB
Currently hauled out ashore Summerfield FL for refit
sanibel sailor is offline  
Old 19-04-2016, 14:00   #8
Registered User
 
pesarsten's Avatar

Join Date: Jan 2012
Location: St Pete
Boat: Sabre 34 , Island Packet 38
Posts: 738
Re: Westerbeke W60/ Perkins 4-154 Parting Out

John, I would like the raw water pump
Pm sent

Paul
__________________
All that is necessary for the triumph of evil is that good men do nothing. Edmund Burke
pesarsten is offline  
Old 20-04-2016, 05:26   #9
Registered User
 
sanibel sailor's Avatar

Join Date: Feb 2013
Location: Ocala FL
Boat: 1979 Bristol 35.5 CB
Posts: 1,964
Re: Westerbeke W60/ Perkins 4-154 Parting Out

Heat exchanger
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	112
Size:	420.4 KB
ID:	122889  
__________________
John Churchill Ocala, FL
NURDLE, 1979 Bristol 35.5 CB
Currently hauled out ashore Summerfield FL for refit
sanibel sailor is offline  
Old 20-04-2016, 05:32   #10
Registered User
 
sanibel sailor's Avatar

Join Date: Feb 2013
Location: Ocala FL
Boat: 1979 Bristol 35.5 CB
Posts: 1,964
Re: Westerbeke W60/ Perkins 4-154 Parting Out

Raw water/sea water pump. Asking $125 or best offer
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	106
Size:	419.7 KB
ID:	122890  
__________________
John Churchill Ocala, FL
NURDLE, 1979 Bristol 35.5 CB
Currently hauled out ashore Summerfield FL for refit
sanibel sailor is offline  
Old 20-04-2016, 05:35   #11
Registered User
 
sanibel sailor's Avatar

Join Date: Feb 2013
Location: Ocala FL
Boat: 1979 Bristol 35.5 CB
Posts: 1,964
Re: Westerbeke W60/ Perkins 4-154 Parting Out

Injection pump
Attached Thumbnails
Click image for larger version

Name:	image.jpg
Views:	120
Size:	426.4 KB
ID:	122891  
__________________
John Churchill Ocala, FL
NURDLE, 1979 Bristol 35.5 CB
Currently hauled out ashore Summerfield FL for refit
sanibel sailor is offline  
 

Tags
perkins, westerbeke


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: Parting out Perkins 4-154 snotter Classifieds Archive 1 05-05-2015 06:48
pearson 424 w60 overheating tinkrman69 Engines and Propulsion Systems 1 28-04-2015 20:43
Westerbeke Four 154 Rad & Cap Advice? AbaftAndBaffled Engines and Propulsion Systems 0 29-07-2013 10:06
Westerbeke W60 Fresh Water Pumps IceMan Engines and Propulsion Systems 0 22-02-2012 10:52
Parting Out knottybuoyz Flotsam & Sailing Miscellany 7 14-05-2007 08:06

Advertise Here


All times are GMT -7. The time now is 03:23.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.