For Sale: Navpod

[CampDavid]

I have a Navpod Gran Prix style pod, drilled for 4 Raymarine St60's and a C80 Plotter, it is on a 12" center. I am changing the helm on my boat and have this pod for sail. It is in good to very good shape, no (zero) Uv damage as it is covered all of the time. It is still on the boat however I can have it off in a flash, Navpod is clearing these out at a reduced priced so my price is also reduced, Any reasonable offer over a $100.00+ plus shipping and it will be on its way.

If you have interest let me know and I can get a picture or two for you.

Cheers and Happy Holidays

Fletch

[casual]

I need something like this,what are the dimensions and how does it mount or what do I hav eto get to make it mount?thank you

[CampDavid]

The face is the largest that Navpod make about 21 x 11.5", you can see it on their web site. It attaches on the backside to two 1.25" or 1" stainless tubes. The cable run in the tubes. (standard 1/4 v 20 thread) I also have a stainless guard that attaches to a fiberglass pedestal on a Beneteau, it does not go to the cockpit sole but locks with two large jam nuts, It is bend at a 25 degree angle. with a rise of about 10" then an angle with the total depth of the offest about 12"
Hope this helps

[casual]

thanks,I'll do some research,and see if I can make it work on a Cabo Rico