For Sale: McMurry Windlass Anchor Winch

[riverrattrog]

anchor winch by McMurry of Seattle. 12 volt DC powered motor works both ways. Made from heavy Bronze. This powered Windlass provides easy control for heavy 3/8" chain and thick or thin ropes for anchors. It is aprox 16' long x 12-1/2" wide x 12" high. The bollard diameter tapers from 1-1/8" at the top to 1" at the bottom. The clutch on the chain side works well to easily disengage or engage it from the winch motor. This thing is stout enough to lift over 600 lbs. There are (2) 1/4" taped holes above where the motor attaches to the winch where a cover would mount to the winch but this cover is missing and another would have to be made out of aluminum or Stainless steel to keep spray off the motor. it has been polished to a high luster and clear coated to keep its clean shine with less maint.It has a stamped number on it of 1449 12 on the top. This unit will ship in (1) box or free delivery,if you are located in California it is cleaned out inside and its ready to be filled maybe half way with gear oil.

the motor has been rebuilt and runs great
asking $ 800.00 obo
buyer to pay for shiping unless in california then its free delivery

if you any questions please call roger at 661 -948-1135 anytime

thank you and do, have a great day
Roger

[Cheechako]

wow, nice job on the "pretty"! Alot of commercial fisherman used to use these up here in the NW. They are STRONG.