Hi all here is my situation I have inavx
on my iPad
as a chart plotter I also have the vesper marine
xb 8000 AIS
transponder and I have a simrad
TP22 tiller pilot, unfortunately due to me not researching properly I thought that I could send the NMEA 0183
data from Inavx
, (ie go to waypoint information) to the vesper marine
xb 8000 which has NMEA 0183
data output and wire that into my simrad
TP22 to steer a course. This doesn't appear to work.
My question is do I need my tiller pilot connected to a chart plotter that is connected to the NMEA
data out from the vesper marine xb8000 that is receiving waypoint information from inavx to make it work?
Sent from my iPad
using Cruisers Sailing Forum