Rinker 250 FV - Trim tab problem

[cruiserone]

My Rinker 250 FV Port side Trim tab actuator is not working.

Anyone who had any problems or replacement actuator made by Lenco on their 250 FV.

What is the part number.

thanks

[GPSocal]

Google is the boater's friend. Try Lencomarine.com.



Sent from my iPad using Cruisers Sailing Forum
Molly Brown
Surf City, USA

[GordMay]

Greetings and welcome aboard the CF, cruiserone.

➥ Lenco Marine - Trim Tab Kits

➥ Lenco Trim Tabs - Trim Tab Kits - Accessori - Boat Systems

[cruiserone]

Thanks Guys,

Because the Rinker has a swimboard on its stern, the trim or actuators can't be seen to identify what is fitted, unless I have a costly lift out/in.

Have contacted Rinker and Lenco for them to check their records of which actuator was fitted, but no record is found/kept.

thanks again

[GPSocal]

If you can lean over the swim step and measure the length and width of the trim tabs you can probably also measure the diameter and length of the hydraulic ram actuator. If you have a diver clean the bottom periodically, have him do it for you. That data would help you get a model number from the mfg. The pump and lines to the actuators are mounted on the inside of the transom and reasonably accessible. Be sure and check the fluid in the pump. My reference point is Bennett tabs, but I assume Lenco are similar in design and operation.


Sent from my iPad using Cruisers Sailing Forum
Molly Brown
Surf City, USA

[cruiserone]

thanks,

Tried to reach for measurements, but cannot reach far enough.

Also they are Electrically operated.

thanks