Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > md7a's Profile > Albums > Searunner 31 Centerboard
Reload this Page View Picture
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Prev | Next
Picture 3 of 7 from Album Searunner 31 Centerboard
Here's the new board with initial 2 coats of cloth and epoxy - before cover coats and painting. Note the lack of split-hose padding (no room in the trunk). We also replaced the plans' eye-bolt pennant attachment with the Belden tube - a PVC-lined hole (lower right) drilled into the board from the upper forward corner - the rope pennant goes through this tube and gets a stopped knot in the adjacent hole. No screws into the wood, no metal anywhere. John Prentice of Westport, the brains of the operation, stands behind the board.
Here's the new board with initial 2 coats of cloth and epoxy - before cover coats and painting. Note the lack of split-hose padding (no room in the trunk). We also replaced the plans' eye-bolt pennant attachment with the Belden tube - a PVC-lined hole (lower right) drilled into the board from the upper forward corner - the rope pennant goes through this tube and gets a stopped knot in the adjacent hole. No screws into the wood, no metal anywhere.
John Prentice of Westport, the brains of the operation, stands behind the board.
Picture Added 17-09-2017 22:02
Added by md7a
« Previous Picture | Next Picture »


All times are GMT -7. The time now is 14:26.

Contact Us - Cruisers & Sailing Forums - Sitemap - Community Rules - Terms of Service - Privacy - Accessibility - Top

Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
close

Privacy Guaranteed - your email is never shared with anyone, opt out any time.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.