Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > Engineering & Systems > Construction, Maintenance & Refit
Reload this Page Hull painting with Roller and Tipping
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

 
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Prev Previous Post   Next Post Next
Old 14-11-2015, 14:29   #1
Registered User
 
Rustic Charm's Avatar

Join Date: Jun 2011
Location: Tasmania, Australia
Boat: Bieroc 36 foot Ketch
Posts: 4,953
Hull painting with Roller and Tipping
This week following my boat being sandblasted tomorrow, I'll be using the Norglass products consisting of 3 coats of two pac rust proof primer, then a coat of two pac top primer, fairing where needed, then another two pac high build primer.

When I do the top sides it will be a single pack gloss. Which I intend to put on with a roller and tipping using a paint brush. Two coats.

Can someone give me advice on what sort of roller to use with both paints? I know some rollers of foam will melt with the two pack products. The guy at Bunnings paint shop didn't seem to have a clue.
Rustic Charm is offline   Reply With Quote
 

Tags
hull, hull paint, paint

« How to open a Simrad wp32 wheel pilot. | What is this for? »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Is Tipping an ASA Instructor Usual? Sybil General Sailing Forum 24 19-05-2018 06:13
For Sale: Roller furling for head sail and roller furling for main cealpotts Classifieds Archive 0 20-09-2013 07:55
Roller Type for Bottom Painting US1Fountain Construction, Maintenance & Refit 3 28-04-2010 18:58
tipping with a foam brush? anotherT34C Construction, Maintenance & Refit 3 24-03-2009 14:19
Tipping dock master/hands?? rleslie General Sailing Forum 33 29-03-2006 19:48

Advertise Here


All times are GMT -7. The time now is 10:59.

Contact Us - Cruisers & Sailing Forums - Sitemap - Community Rules - Terms of Service - Privacy - Accessibility - Top

Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
close

Privacy Guaranteed - your email is never shared with anyone, opt out any time.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.