I think I have a hilleRange 2121 or 3121. Can't find any numbers. I've run 3/8 soft copper to the
galley. Now I need to apply the
stove. I thought it was a 5/16 nipple on the back of the
stove. However it seems they don't make 5/16
propane hose,or 5/16 to 3/8 reducers. I hoped to terminate the 3/8 soft copper with a flair nut and put a 3/8 to 5/16 reduceing nipple then to a prefab 5/16 l.p hose. But seems not the case. Any one know where I'm going wrong? I'm not at the
boat to double check my measurements