It is all fixed!!!!!!
The hardest part was waiting on
parts. Since this is a
new boat for me, and the previous owner didn't maintain it very well I decide to re-wire it and replace all the
parts I could. I re-did all the
electrical connections and replace every
electrical component I could. As I dug into it, it really needed to be done! Things were in bad shape....
This is what I did:
- Replaced all connections with
marine heat shrink connectors with
adhesive and treated connections with dielectric grease
- Replace the following - Pre-Heat Solenoid, Stop Solenoid, Temperature Sender, Temperature switch,
Oil Sender,
Oil Switch, Glow Plugs, 10 AMP & 20 AMP Breakers, Starter and had Alternator rebuilt.
Thanks to all who replied