How to Tell if Anchor Will Fit on Roller ?

[SV Demeter]

Im looking to replace my current anchor with one of the following (3) choices and am wondering if there is a way I can tell if these anchors will fit on my existing anchor roller? I currently have a 45lb bruce. Im wondering what measurements to take on the boat end to then compare against the proposed anchors. Or am I over thinking this and should not worry cause any one of these 3 anchors will fit just fine?

1. Rocna Series 25 (Canandian made)
2. Manson Supreme 60 lb
3. Delta 65 lb

[zeehag]

try measuring. i thought all males did that first.....

i think they will fit-- there is a wauquiez here with big heavy anchors on her rollers but i dont know if your rollers are same as theirs....

[SV Demeter]

Ha ha thats a good one. Wauquiez Amphitrite Ketch is what I have. I suppose I will measure width and lenght of exiting roller as well as overhang and angle of stem. I was just wondering if there was a standard set of measurements to take that I could compare against the anchor specs.

[Bash]

Category:Rocna bow compatibility (Rocna Knowledge Base)

[avb3]

Originally Posted by zeehag

try measuring. i thought all males did that first.....

WHO told you THAT rumor! LOL... good one.

[zeehag]

Originally Posted by avb3

WHO told you THAT rumor! LOL... good one.

mebbe was a bad peacock rumor as i watch guys try to fix stuff they keep breaking and making......
also is first thing i am always asked-- where is th etape measure..\lol

[Olorin]

Rocna's website has paper templates that you can print out, tape together and see if the specific model will fit. I did that and everything worked out fine.

[SV Demeter]

Originally Posted by Olorin

Rocna's website has paper templates that you can print out, tape together and see if the specific model will fit. I did that and everything worked out fine.

Thanks I saw that tab and was curious if that would work.

[avb3]

Originally Posted by zeehag

mebbe was a bad peacock rumor as i watch guys try to fix stuff they keep breaking and making......
also is first thing i am always asked-- where is th etape measure..\lol

Ohhhhhhhh ....you were talking about guys *fixing* stuff, as opposed to expressing exaggerations of measurable items.

Gotcha!