Hi-Mod | RiggingAndHardware.com

External Link Notice

Page Information:

Page Title:
Hi-Mod | RiggingAndHardware.com

Page Description:
Hi-Mod compression wire terminals are mechanical wire terminals typically used for sailboat standing rigging.

This Page is About:
Hi-Mod, Norseman, Sta-Lok, Stalock, standing, rigging, sailboat, wire, eye, fork, insulator, toggle, stud, 1x19, stainless, re-usable, mechanical, self fit, compression, compact, strand

Continue to External Link →

NOTICE: By following the "Continue to External Link" above you will be leaving Cruisers & Sailing Forums web site and entering a web site hosted by another party. Cruisers & Sailing Forums does not have any responsibility for, or control over, any of these sites, their content or their privacy policies. We do not endorse or make any representations about them, or any information, products, or materials found there, or any results that may be obtained from using them. If you decide to access any of the linked third parties, you do so entirely at your own risk.

Other Discussions You Might Enjoy
Thread	Thread Starter	Forum	Replies	Last Post
Rigging instructions for the standing rigging of the 321 Oceanis	anadale1	Deck hardware: Rigging, Sails & Hoisting	0	20-06-2011 15:52
Re: Rigging, Compression Fittings for Standing Rigging	Maineiac_sailor	Deck hardware: Rigging, Sails & Hoisting	2	26-01-2011 07:30
Rigging Modifications	delmarrey	Construction, Maintenance & Refit	8	09-01-2006 16:09
Expert Rigging Advice	GordMay	The Library	0	19-04-2005 19:24
Prout Snowgoose rigging	Talbot	Multihull Sailboats	0	27-08-2004 12:47

All times are GMT -7. The time now is 11:39.

Visit our Popular Forums

The Fleet

Cruising Business

Life Aboard a Boat

Seamanship, Navigation & Boat Handling

Engineering & Systems

Photo Categories

Recent Photos

Listing Categories