Cruisers Forum

Join CruisersForum Today

Thread Tools Rate Thread Display Modes
Old 22-05-2008, 07:17   #1
Registered User

Join Date: May 2008
Posts: 1
1st timer

Hi Everyone I am new here but have read lots of posts ad you fellas have lots of experience so I'd like to run something by you?

I am rebuilding the ski locker and a bit of floor in my boat. The ski locker is complete and glassed with polyester, the guy who helped me told me to just paint gelcoat onto the glass after a sanding. I called industrial plastics they tell me I can't just paint gelcoat on with a brush(to thick and gel like)? I was told to use plastic primer then a good quality marine enamel. Also wondering if I should paint the bottom of the floor patch over the ski locker with this same primer and paint or just paint because it's bare wood? I have a few more questons but will start with these I appreciate any advice you guys can provide Thanks Ken
kaltireman is offline   Reply With Quote
Old 22-05-2008, 15:50   #2
Senior Cruiser

Cruisers Forum Supporter

Join Date: Nov 2005
Location: Tasmania
Boat: VandeStadt IOR 40' - Insatiable
Posts: 2,317
Images: 91
I'm no expert, but I would put flowcoat on the floor and use high-build primer then enamel topcoat on the locker.
Weyalan is offline   Reply With Quote

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
First timer posting.... Jolly-Roger jolly-roger Meets & Greets 11 30-10-2008 14:34
first timer schoonerman Meets & Greets 5 13-05-2008 20:33
First timer Commodore Binx Meets & Greets 4 16-01-2008 12:12
First Timer dquinn Meets & Greets 4 17-12-2007 11:52
1st-Timer seeks advice Don't Panic Meets & Greets 14 12-12-2007 18:25

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -7. The time now is 03:55.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.