How add oil pressure gauge?

[GordMay]

Originally Posted by Wotname

Be aware that there are (at least) 2 different standards of ohmic range for oil pressure gauges. This VDO sender is a 10 to 180 ohm sender.

However VDO makes about a zillion senders so it is very likely they will have one with the same thread as your engine and with a suitable ohmic range for whatever gauge you intend to use.

Standard American Oil Pressure Gauges are 240Ω [0 PSI] to 33.5Ω [80 PSI].
Standard European [International] Gauges are 10Ω [0 PSI] to 180Ω [80 PSI].
➥ https://www.cruisersforum.com/galler...r&imageuser=79

[sfnz]

if your block hole is 1/8 female then a standard grease gun hose will work just dandy, rated way way above whatever pressure your engine is likely to put out and easy availability