Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > Engineering & Systems > Engines and Propulsion Systems
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 27-12-2009, 12:51   #1
Registered User
 
shieek's Avatar

Join Date: Oct 2009
Posts: 4
Unhappy '76 Volvo Penta MD11C Breaking Connecting Rod Bolts

Hello. My 1974 sailboat has a Volvo Pent MD11C that bit the biscuit after I bought her. (Against reasonable advice), I decided to have her rebuilt. Upon dis assembly they discovered that the connecting rod bolts had broken and twisted one of the connecting rods. Bought replacements & cylinder liners etc..) only to have the same problem occur again within 50 hours. Anyone have any advice as to what could be going on. had the mechanic check the crankshaft with a micrometer to check wear and was told it was OK. Any advice/insight would be greatly welcome.
shieek is offline   Reply With Quote
Old 27-12-2009, 13:38   #2
Moderator Emeritus
 
Boracay's Avatar

Cruisers Forum Supporter

Join Date: Feb 2004
Location: Sunshine Coast, Qld, Australia
Boat: CyberYacht 43
Posts: 5,174
Images: 19
Injector timing?

Could the injector pump be squirting fuel in at the wrong time? Maybe a few degrees too early...
Boracay is offline   Reply With Quote
Old 27-12-2009, 20:37   #3
Eternal Member
 
Chief Engineer's Avatar

Join Date: Aug 2006
Location: North of Baltimore
Boat: Ericson 27 & 18' Herrmann Catboat
Posts: 3,798
Hydrolock?
Chief Engineer is offline   Reply With Quote
Old 28-12-2009, 04:21   #4
Moderator Emeritus
 
Ex-Calif's Avatar

Cruisers Forum Supporter

Join Date: May 2007
Location: Ohio
Boat: Now boatless :-(
Posts: 11,580
Images: 4
What was the operating mode of the engine at the time of the failure? (start, idle, cruise, after 30 minutes, etc. etc..)

What cylinder? Front, back etc.
__________________
Relax Lah! is SOLD! <--- Click
Click--> Custom CF Google Search or CF Rules
You're gonna need a bigger boat... - Martin Brody
Ex-Calif is offline   Reply With Quote
Reply

Tags
penta, volvo


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
'02 Volvo Penta Engine S Campbell Engines and Propulsion Systems 93 12-10-2019 23:19
Volvo MD11C Transmission Problems sailingharry Engines and Propulsion Systems 23 12-01-2013 23:17
My MD11C volvo needs a hand crank for manual starting froggman180 Engines and Propulsion Systems 14 27-04-2009 10:00
Hand crank assembly for a Volvo MD11C froggman180 Engines and Propulsion Systems 0 03-09-2005 00:39
Volvo-Penta MD3B GordMay Engines and Propulsion Systems 6 14-01-2004 22:37

Advertise Here


All times are GMT -7. The time now is 22:12.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.