Ducky 19 is the biggest
member in the Ducky
family. Construction of the yacht tasted by years of exploitation in the most severe conditions in different
water areas. Catamarans are created for tourism and individual expeditions for the crew of 4 and more persons.
A great carrying capacity of catamarans and the size of the
deck allow to place a considerable amount of luggage and at the same time there remains enough place for the crew.
Ducky 19 is perfect for
boat rental. Combination of a little weight, big carrying capacity and simple operation makes it ideal for beach rentals.
Floats of the yachts deserve a special attention – they are not afraid of frequent landings on a high speed, they are not dangerous for the swimmers unlike other hard-framed catamarans. It is especially important, when the
boat is operated by beginner.
Basic set includes two
sails: staysail and
mainsail.For those, who has already mastered operating of yachts in basic set and want to get even more speed of Ducky 19, we offer extra
gennaker sail.
This is an
asymmetric spinnaker, that is usually used on yachts in case of downwind. Having such
sails on a board in a fresh
wind, catamarans are able to get into gliding mode and essentially increase the speed.
It is possible to equip yachts Ducky 19 with
outboard engine up to 3l. Just for this purpose there is an extra transom board, it can be attached to stern seat.
Frame,
mast and connecting elements are made of duralumin alloy D16T and AMg, and protected from sea
water corrosion by anodizing.
Centerboard and
rudder are
fiberglass.
Sail is made of Dacron Polyant , weight 170g/sq.m (0,41 lbs/sq.f)
All fastening elements are made of
stainless steel.
Floats have 2 sections, divided by waterproof wall, made of PVC-fabric Valmex, weight 1000 g/sq.m (2.44 lbs/ square feet)
Tikaem Travel - Home