Breaker Panel Labels

[DYMOsupport]

Originally Posted by CaptTom

Wow, thanks CM! Whatever you folks at Dymo do to monitor your brand on line is working!

Yes, it was the Dymo Rhino Industrial 4200 that I looked at briefly on line. Frankly, my only criterion was the ability to make 1/2" white-on-black labels. I had no idea about the breaker label capability. I'll dig further. For the record, these are marine breaker panels, not the same as home and industrial breakers.

Good choice! That model has the function as well (first blue key from the left). You can see the whole user guide here (page 12 has the information on creating an industrial breaker panel label along with a picture).

Yes, marine breaker panels are quite different, thank you for pointing that out. I have thought of using a 24 mm tape vertically but model 4200 would not work with it (19 mm max) so the best option is probably making separate horizontal labels. We have white-on-black vinyl tapes so I am sure they would look good.

Thanks a lot for the great feedback, it is certainly appreciated.

^CM
@DYMOsupport

[smac999]

the last time I looked the p touch did not come in white on black in the better material. only the crappy material which does not last very long and peels off. the black on white was available in the better material. I don't remember which is which. ordered a while back. but there is defiantly a difference between their 2.