Want To Buy: Circuit Board for Air X (304) or functioning wind generator

[calderp]

I went to considerable effort to build and install a mount for an older Air X wind generator I was given only to find it has an issue with the circuit board and is essentially non-functional. It's a slim chance, but it would be great if someone had a circuit board from one of these older 304-series (90's era, I believe) Air X generators. I would also be interested in buying a functional wind gen of any brand if someone has an older model they would be willing to sell me affordably.
Thanks!

[Ambler]

I have one to sell, I am in Tasmania Australia. It would help you to let us know where you are

Sent from my GT-S7275T using Cruisers Sailing Forum mobile app

[piloto]

Calderp, fwiw- the old air 300 series were part of a recall of about 3500 that had bad circuit boards. You should be able to send it in to Southwest Windpower and they will repair for free. The serial # will determine the eligibility. But basically, they made good on the units that had defective circuit boards.


Sent from my iPad using Cruisers Sailing Forum

[calderp]

Ambler, I am in the US, so probably not economical to ship.
Piloto, thanks for that information! I'll try it today, although with the recent collapse of southwest and purchase of the air X by some other company, I might still be out of luck.

[desperate]

I was told the company that took over AIR will repair and service old units.Tryrimuswindpower.com.
Best of luck they are in the USA.

[desperate]

I lost a P somehere is is primuswindpower.com

[Boatguy30]

I have a airX in st augustine. It maybe a 403 I'm not completely sure. $300 with pole and 20' 8ga duplex wire.