JRC radar Problem

[JGomes]

Hello
I have a Jrc 1800 radar that had a NKR-1065 Scanner. the scanner has been destroyed and The company doesnt make them anymore. IO have searchedall over for one and can't find one. So my questiion is is there a way to hook another scanner up to the JRC 1800 Plotter?

[Celestialsailor]

The only recommendation I can make is to check ebay. It has a feature of "Saved Searches", where every time the phrase JRC 1800 comes up, it gives you notification. I doubt a Furuno or others can adapt...

[tailhooka]

do you still need a scanner or do you still have your display unit and want to sell it, my display unit shorted out in the on/off switch card otherwise worked great....

[roymartinson]

Hi There. I have a JRC LCD Radar 1000 MK 2. with a GPS 30 Furuno Could anyone out there explain what coloured wires from the Radar go to the GPS to give a lat and long readout 0n the JRC Radar Screen? They both have Green, Yellow, Blue and white wiring, but I don't know which colour goes to one another. Roy

[herculesboat]

Originally Posted by tailhooka

do you still need a scanner or do you still have your display unit and want to sell it, my display unit shorted out in the on/off switch card otherwise worked great....

I agree that do you still need a scanner or do you still have your display unit and want to sell it

[phorvati]

I have JRC 1000. I had a setup that used to work, but Ive been having some issues with interfacing with NMEA garmin output via RS232. Latest I received from good folks at JRC is instructions listed in R1000Garmin GPS.pdf. This is my next step. But you might not need to do that if you typical wiring setup works. See Cable.png for typical wiring instructions.