Raymarine ST 6001 Autopilot no Power

[babysnookstoo]

my auto pilot has power to the dash digital box but will not come on anyone know if this unit has a fuse inside or a reset,

[Capn Dan]

The control head does not have a fuse inside. The course computer will have one or more fuses, depending on the model.

[babysnookstoo]

Thanks dan i will check further for corrosion issues.

[CaptainBW]

Did you check the power voltage where it comes into the corepak?

I had a similar problem and ended up sending the corepak to Ray. They found and replaced a bad component on the circuit board.

[Capn Dan]

Check the red and ground Sea Talk wires at the computer. You should have 12 volts.

[babysnookstoo]

Thanks i am on my tug at this time and will do some checking when i get off.

[bigpuff]

in the main box down below there is a 2 amp fuse (a couple of them)they normally have a spare on the side(inside)