Was removed for paint
job, it ends replacing al hoses and seals
, even head gasket
, cylinder removed por inspection
injector tips replaced,. when the engine
starts after 10 to 15 minutos dark oil
starts to come out of the No 1 Cylinder, and at the same time the oil
press drop a bit (5 or 6 Psi), engine
is out of the boat in a test bench, removed the head
and the top of the No 1 Cylinder was dry only light blak dry smoke on top of it.
does anybody have any clue of this?
Capt. Tony Valbuena