Link 2000R parameter changes

[nukahiva]

I have a Link 2000R controller set for AGM batteries. The default? 'charged voltage' parameter is set for 13.2 volts. The bulk charge voltage on the meter generally starts at around 13.* volts and tops out at 14.4 volts. I plan on installing a new set of Full River AGM's and they recommend a 'charged voltage' setting of 14.7. I verified this with a company tech rep. My question is do I just change this parameter setting to 14.7v on the Link? It is the set up button 'under' the Volts button. I would hate to cook a new set of batteries.

The tech rep also verified an absorption voltage of 14.7, and a float voltage of 13.7. I'm not sure how to adjust those values, the Link manual is not very clear on that, or my aging brain can't figure it out.

Thanks I advance for the help.