- Replacing headliner - could I use planking on the ceiling instead of fabric?
- Antenna internal resistance
- Taswell 49 rudder post
- Whats next?
- Where should I place the anchor roller in to be clear of the bobstay?
- Paint and Sanding
- One vs Two component Zink chromate/self etching primer?
- Chainplate popped out when sailing - what's next?
- B&G Plotter and Raymarine Autopilot
- Hull to keel transition rust repairs
- Bottom Paint in Washington State-Help!
- Bottom Job with some extras
- Vinegar
- Painting a black hull before moving it to the tropics
- Oil Leak
- estimate needed pls
- Cracks in Gelcoat and Fiberglass Near Keel
- Advice for Project List Pre-Splash?
- Marine ply in Jacksonville FL
- Can I use a less expensive caulking as a bedding layer?
- Removing old wax
- Cuba Survey?
- LBI 940 Vinylester Fairing Compound
- White Paint Over Black - Pettit Vivid
- varnish removal advice
- Groundplate maintenance
- Dropping Rudder
- sink and bilge hose drain
- When to rebed thru-hull/seacocks
- Epoxalypse now 1708 or 1700 clarifaction
- Deck Paint - US or Carribean?
- Winch Handle Pocket
- Toerail / Plasteak / Threaded fiberglass rod attachment
- Looking for a 3/4" plastic fitting (photo)
- DIN rail stuff
- In deep again!! Fixing one thing leads to another issue.
- 2" Transducer through-hulls: are they transducer-specific?
- Lightning protection
- Cleat Backing Plate
- Diesel supply source for hydronic heater
- Bought a boat and I'm getting in deep!
- Etch aluminum vs self etching primer?
- cutting stainless steel tank - best cutting approach?
- Recommendation for bottom paint
- Order to polish & paint, hull-boot stripe-bottom
- Whitlock Steering
- Bulkhead depth gauge cloudy and crazed
- Adding a deck saloon
- Lewmar Hatch removal/Gasket Lewmar superhatch
- Mast Step Dry Roy and Fiberglass Crack at Stinger.
- Place for batteries
- NON SLIP TO HOT
- Endurance 35 Rudder Removal
- Square top
- Help needed, what am I looking at?
- Noise and resistance on port hydraulic steering...
- Morgan OI51 lower pindle
- Diesel Fuel Filter
- Propane stove safe?
- Anchor locker drain design
- Help, stuck on deck!
- Aluminum anodizing
- Question, questions, always these niggling questions
- Marine service companies, need recommendations for West Palm Beach
- Florida diesel fuel tank manufacturing recommendations
- Hunter 37 Deck Windows
- Beneteau First 47.7 Bilge leak
- INTERLUX BrightsideŽ One-Part Polyurethane
- Holding Tank Plumbing
- Changing engine oil
- Cabin Headliner Removal
- Remounting of SS deck protector / plate
- Italian Oven problem
- Waterlogged Rudder
- Prep for Caribbean summer haul out
- T-Nuts and other nut alternatives
- Lead bricks for ballast in our steel hull
- Build in the Philippines
- SS Anti Galling lubricant
- Monitor windvane adjustment question
- Transducer Location
- Retrofitting proper bow and stern thrusters
- Norcold Fridge Removal
- Steel Hulled 73 Colvin Gazelle Schooner??
- Rust in steel Schooner bilge? Some say "run"?
- Preventing fuel spills
- Cabin sole replacement
- Bimini frame design
- teak color
- designing a bimini frame
- Foul Release Coating Help - Seaspeed VX10 V's Intersleek 900
- Leaking Deck Hardware
- om636 Heat Exchanger
- Don't Be Like Jerry
- Gelpeel Pro: any experiences with this tool?
- Fremantle Yachties.
- keel cooled fridge and freezer on the hard
- DIY boatyard in South Carolina?
- Options for water tank vents?
- Hirondellle aero-rig cabintop bearing
- Fitting a tiller arm for autopilot in a tight space
- Sail cleaning on the boat?
- Haul Out Marina- Ft. Lauderdale area
- crazed plexiglas windows
- Changing Clutch and throttle cables
- ABI 192613 forestay release lever yay or nay? Looks like a POS to
- alberg 37 halyards
- Another antifoul question SE Queensland
- Lead ballast in steel keel and salt water
- Help - shaft nut threaded, how to change bearing now?
- Dried wood on wheel
- Bottom Paint Color. Does it matter?
- Bottom paint for trailer sailers
- Sydney Survey needed - anyone recommended?
- Refrigeration Refit Challenge
- Rio Dulce Marinas
- Window Replacement
- Aluminum versus stainless steel fuel tanks
- Considering buying a Ply / Ply-Glass boat. What do I need to look for?
- Chromed bronze turnbuckle turning green - problem?
- Raritan ElectroScan Hold N Treat System?
- The diameter of the wheel And the compass to it Cal 2-29
- Rudder identification
- Catamaran Steering
- Portlight Help Needed
- Lewmar Winch Paw Springs
- Repairing damage to keel support structure
- Costs of upgrades
- Autopilot: Wheel based or quandrant servo?
- Mixing Gelcoat into Epoxy
- Joe Adams 12m Cruiser Racer Plans
- Fiberglass water tanks/fuel Tanks...Thoughts?
- Paint over epoxy in heads (shower)
- Has anyone used SEM Griptide for decks?
- WASHING MACHINE AND TUMBLE DRIER?
- Help with a part number/item
- How often should I clean epoxy pumps?
- Lining a hole through 1" fiberglass...
- Grinded tons of blisters. Now what?
- Evolution of threads
- Is there a boat yard in Mazatlan that allows me to work on the boat myself
- Overlaying 2 types of bottom paint
- NAVTEC boom vang and backstay system
- Rust on Keel - how to proceed?
- Corecell and balsa core decisions decisions decisions
- Rudder damage , have you inspected your rudder lately ??
- Preventative Maintenance
- Who can print boat name on Sunbrella
- Drawing on mainsail
- A Bottom Paint Story
- When is new anti-fouling really needed?
- Replacing Engine Gear Control Parts On A Bavaria 38
- In the water cleaning with ablative paint
- Bow damage
- Bottom Paint - in Tahiti
- Refrigeration plan questions.
- Racor filter hose fitting size
- Thru hull material for an aluminium hull
- Stiff tiller/windvane steering
- Carvel refit.
- Windlass Foot switches, remote, or hand switch for new windlass
- HULL CLEANERS AND POLISHES
- 14 mm inox shaft in Martinique
- Old flares
- New Found Metal port windows failing
- 20 year project needing a new direction
- How many Fire Extinguishers do i need?
- Steel 36ft insulation above the water line
- Refitting in Puerto Rico
- Solar Panel Attachment question
- Anybody removed bow double bunk cabins to make a big single cabin?
- Pod Repair
- MD 2040 Volvo Pentax oil pan leak
- Desperate for Brnz. Seacock Help
- Deck paint
- Identifying 5/8" Turnbuckle
- Old Navigator or Tactical instrument
- replacing window trim?
- Velvet drive transmission issue
- Gaskets instead of silicone?
- Getting the black out of teak...
- Strip plank "ceilings" and furring strips out of cedar?
- Icebox / Fridge Liner Refit
- HR352 Keel Construction Question
- What are these rivets on the deck, cause for concern?
- Long Link Plates for ProFurl
- Adding a Spinnaker
- Right turn Clyde
- CE CONFORMITY SAINT FRANCIS 44
- zipper corrosion
- Atlantic Towers arch schedule 40 or 80
- Mahe 36 Port Light and Window Leaks
- Repairing a Pedrick 40
- Sailboat Maintenance (it never ends)
- Reefer/Icebox refit questions
- Flush Mounted Hatches
- Realistic sized desalinator (water-maker)
- Watertight companionway hatch
- Anode reaction
- Replacing ribs and keel board 21' trailer sailor
- Kiwi Grip colour matching
- Jib track leaking
- 12v vs 6v battery construction differences?
- Mouse on board
- Surveyor in New Zealand
- hull cracks around strut and stern tube
- Varnish without sanding between coats
- Antifouling For Saildrives
- A few refit questions
- sailrite
- Steel Sailboat - deep bilge
- "Baby it's Cold Outside": Icing, de-icing, re-icing question?
- Allcraft Water Heater - A real longshot question
- Adler/Barbour Power Plate
- What y'all think about this boat for sale?
- Lots of repairs.
- Solar Hot Water System
- Marine ply or PVC paneling?
- Rudder has too much play
- What have I started
- Bulkhead repair questions
- Delrin rudder bearing and marine grease
- Wood that matches teak
- 32 Islander MK2 (Duble Dubya Refit)
- Covering the sail-drives
- Teak Deck Refurbishment, what caulking?? And how to fill the cracks?
- Need Hypalon Dingy Glue
- Dingy dinghy question
- Fibreglass for rudderhole construction
- Is engine room insulation required?
- Custom Portlights
- LA, MS, Al, FL panhandle DIY yards
- Does anyone have any experience applying West Systems 105 epoxy underwater?
- MCA coding and standing rigging.
- Best bonding sealant
- natural Teak Deck repair
- Leak into Balsa Core from Deck Hardware
- Cockpit Inspection Hatches
- Large B&R rig standing rigging replacement mast up?
- Internal ballast
- Fiberglass tank refit - should I cut it open?
- Jerry Can Covers
- Frozen SS Screws Securing Winch to Mast
- Beneteau Compaionway handrails
- You Get What You Pay For
- Zodiac RIB question
- Anyone have a UAT Watermaker?
- Replace Standing Rigging - 2001 Beneteau 361
- Palm tree sap
- Rudder problem - fatcup is broken