Cruisers & Sailing Forums (https://www.cruisersforum.com/forums/)
-   Marine Electronics (https://www.cruisersforum.com/forums/f13/)
-   -   Icom Question (https://www.cruisersforum.com/forums/f13/icom-question-81784.html)

CampDavid 12-05-2012 14:18

Icom Question
 
I upgraded my Icom M502 to an Icom M504. I am still ( or want to)using the HM127B command Mic from the M502.

The Command shows, changes channels however no reception or transmission from the Command Mic. The main radio works fine.

I have searched the web and see the Command Mic for a M504 is listed as a HM157.

The cable is also listed as a difference # OC1000 (502) OC 999 (504), my question, does anybody know is the HM 127 mic will work on a M504 radio?

Would I need to replace the command Mic also?

Fletch

fairbank56 12-05-2012 18:36

Re: Icom Question
 
The HM127 is ONLY for the M502, M602 and M402.

Eric

CampDavid 12-05-2012 18:42

Re: Icom Question
 
Thanks, do you know if I can use the cables from the 127 if I replace it with a 157

fairbank56 13-05-2012 05:26

Re: Icom Question
 
You may have already damaged the radio by connecting the HM-127 to it. The OPC-1000 is the cable used for both the HM-127 and HM-157. The OPC-999 is an extension cable for the OPC-1000. You could also go with the CommandMicIII which is an HM-162 but requires the OPC-1540 cable.

Eric


All times are GMT -7. The time now is 21:05.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.