Cruisers & Sailing Forums (https://www.cruisersforum.com/forums/)
-   Marine Electronics (https://www.cruisersforum.com/forums/f13/)
-   -   Tachometer 'Tached Out' !? (https://www.cruisersforum.com/forums/f13/tachometer-tached-out-38363.html)

s/v Geneve 26-03-2010 09:39

Tachometer 'Tached Out' !?
 
I have had no problems until last week when I tried to start up the Perkins 4-108 in my Endeavour 40. The starter would not engage although I could hear the solenoid getting power. After I tried unsuccessfully many times to bump the starter over (it had been several weeks since it was last started) I finally resorted to jumping the solenoid over to force it to spin. Now my engine starts better than it has in months, but when I turn the key over the tach goes right over to the high side and stays pegged out.:banghead: I removed the panel and went through each of the connections in the back with no abnormalities or changes. I fired up the engine and it runs just fine but with the tach pegged out you have no way of setting power. Have I fried my tach? starter solenoid? I'm pulling my schematics out this weekend, but since I'm traveling now I was curious if anyone else has had this problem before. Thanks!

Daniel


All times are GMT -7. The time now is 06:52.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.