Cruisers & Sailing Forums (https://www.cruisersforum.com/forums/)
-   Engines and Propulsion Systems (https://www.cruisersforum.com/forums/f54/)
-   -   Yanmar starter (https://www.cruisersforum.com/forums/f54/yanmar-starter-219676.html)

FSmith 17-06-2019 07:53

Yanmar starter
 
Has anyone used an after market starter for a Yanmar 3ym30.

sguerrero1971 17-06-2019 08:22

Re: Yanmar starter
 
I have a 4JH2-DTE and just purchased a replacement starter from Rare Electrical through Amazon and it is doing just fine. It was an identical (in appearance) replacement to the one that came off the motor. I am the third owner to the boat, so I am not sure how long ago the last one was put on, I've had the boat for 2 seasons. I plan to clean the old one and keep it as a spare, since I think the issue is corrosion on the contacts in the solenoid or brushes, since it throws the bendix forward, but doesn't always spin the starter motor. This was the reason I replaced it.

I know it isn't the same model, but it is a Yanmar.

Good Luck.


All times are GMT -7. The time now is 23:36.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.