Cruisers & Sailing Forums (https://www.cruisersforum.com/forums/)
-   Electrical: Batteries, Generators & Solar (https://www.cruisersforum.com/forums/f14/)
-   -   Best deck seal for solar cables through-deck? (https://www.cruisersforum.com/forums/f14/best-deck-seal-for-solar-cables-through-deck-213711.html)

SailFastTri 08-02-2019 11:23

Best deck seal for solar cables through-deck?
 
I am planning to route some solar panel cables through the deck in an area that's frequently washed with waves, and looking at the Scanstrut DS-H6 Horizontal Deck Seals. The cables are round, slightly less than 1/4" diameter.
These look ideal but this is an important choice considering I'll be making more holes in an area that will be frequently awash -- I would be interested to know if anyone has any experience with these (good or bad) or can suggest anything better.

GordMay 08-02-2019 11:27

Re: Best deck seal for solar cables through-deck?
 
The Scanstrut DS-H6 Horizontal Deck Seals are more elaborate, and might provide a more assured seal, but they're big.
I've NEVER experienced a leak /w Cable Clams ➥ https://www.bluesea.com/products/cat...23/Cable_Clams

https://dh778tpvmt77t.cloudfront.net...nails/1001.png

Kenomac 08-02-2019 11:27

Re: Best deck seal for solar cables through-deck?
 
There are specific waterproof through deck connectors made special for this purpose. Simply google "solar through deck solar connectors" and a bunch will come up as images and take your pick. West marine even has some choices.

toddster8 08-02-2019 11:33

Re: Best deck seal for solar cables through-deck?
 
I've got this one on my shopping list, but not sure exactly how I'd mount it.
https://www.amazon.com/gp/product/B0...V1LK1NBR2&th=1
https://images-na.ssl-images-amazon....L._SL1001_.jpg

I've had a cable clam, as shown above for a couple of years, for the SSB antenna, but somehow, mysteriously, the below-decks connector filled up with water, inside a copious wrap of self-amalgamating tape. I haven't figured out what went wrong.

SailFastTri 08-02-2019 11:41

Re: Best deck seal for solar cables through-deck?
 
Quote:

Originally Posted by toddster8 (Post 2821019)
I've got this one on my shopping list, but not sure exactly how I'd mount it.
https://www.amazon.com/gp/product/B0...V1LK1NBR2&th=1

I've had a cable clam, as shown above for a couple of years, for the SSB antenna, but somehow, mysteriously, the below-decks connector filled up with water, inside a copious wrap of self-amalgamating tape. I haven't figured out what went wrong.


I have had bad experience with the cable clam also. The water got in when the rubber degraded under the base. I would not use a rubber pad under the base, no matter what I get -- my plan is to use Butyl rubber sealing putty.

noelex 77 08-02-2019 13:24

Re: Best deck seal for solar cables through-deck?
 
1 Attachment(s)
If you have multiple wires that need a waterproof deck connection do not dismiss a swan neck. It is old but arguably superior solution that seems to have been forgotten.

coopec43 08-02-2019 17:27

Re: Best deck seal for solar cables through-deck?
 
1 Attachment(s)
I shudder every time I have to make holes in the deck as I know they are a potential source of leaks.

I'm not at the stage of installing solar panels but when I am I will almost certainly avoid the major boat accessory manufacturers because of their exorbitant prices. (I can't afford them)

I'm not recommending them, but I'm wondering about something cheap like the ANCOR
Through-Deck Wire Seals
Do you think they would do the job?

Clive

Telemark43 09-02-2019 09:28

Re: Best deck seal for solar cables through-deck?
 
I've used ScanStrut Mult Deck Seal for SSB, solar and and additional through deck wiring. It's mounted on the rail, gets a wash in a good wind and too much sail ! and of course every rain shower. No leaks so far, one has to carefully drill the insert slightly smaller than the wires passing though and use care and soap to assemble.


Redline452 09-02-2019 09:30

Re: Best deck seal for solar cables through-deck?
 
Quote:

Originally Posted by GordMay (Post 2821010)

+1 on this. I have three at the base of the mast for 7 cables (2 x 3 ea, + 1 for the larger radar cable). Never a drop and the larger plugs fit through the hole so all connections are on the inside. The PO’s screw-down fittings never quite sealed as well.

stormalong 09-02-2019 11:06

Re: Best deck seal for solar cables through-deck?
 
Drill a hole slightly larger than the cable. Counter sink it a bit to remove the sharp edge. Pass the wire through and seal it with 3M 4200, Sikaflex, or the caulk of your choice. It will outlast the cable and cost virtually nothing. And you will not need to drill additional holes for screws to hold it in place.

Of course if you are drilling through a cored area be sure to seal the core with epoxy and then re-drill - regardless of your product choice.

EngNate 09-02-2019 11:27

Re: Best deck seal for solar cables through-deck?
 
I've long had good results with cable clams. Drill the insert with a new, sharp drill the same size as the cable and a little water to lube it. For drilling put the insert into the top shell and screw down on a piece of wood - tighten only enough to keep it from turning. Too tight and the insert will be compressed and the hole will be larger than intended. I use silicone or 3M 4200 instead of the gasket provided, which doesn't make a good seal over irregular surfaces and does seem to deteriorate with age. Initially tighten the base only until the sealant is squeezed out evenly all around, allow it to cure and then finish tightening the mounting screws. That will form a gasket and then compress it for a good seal.

Mikado 09-02-2019 13:15

Re: Best deck seal for solar cables through-deck?
 
Swan neck deck fitting. Never found a supplier in the US so had to order from England.

heysteve 09-02-2019 14:09

Re: Best deck seal for solar cables through-deck?
 
https://www.katomarine.com/swannecks.htm

puffcard 09-02-2019 15:28

Re: Best deck seal for solar cables through-deck?
 
One problem with solar is the MC connectors. More than likely you'll be adding the panels to the aft section of the boat. I used the aft vertical section of cockpit coming. Drill a hole big enough for the connectors, run cables, add a drip loop, pack with butyl tape and cover with small SS clam vent. Done, no leaks and very easy to pull cables out when you need to.

CLady 09-02-2019 21:43

Re: Best deck seal for solar cables through-deck?
 
I did what Puffcard did--no leaks.


All times are GMT -7. The time now is 06:43.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.