Raymarine e7 Power connector Pin configuration
I found this link on Raymarine
Pin Out: a/c/e/gS-Series Power/NMEA 0183/Video Input Cable - Raymarine Technical Forum
Since neither the cable or the connection in the MFD has numbers I feel a bit uncertain about this specs. I guess that we are looking into the contact of the cable on the Raymarine page, if it is so the + should be the left pin when looking into the connector at the back of the MFD?
|All times are GMT -7. The time now is 20:51.|
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.