Cruisers & Sailing Forums (https://www.cruisersforum.com/forums/)
-   Monohull Sailboats (https://www.cruisersforum.com/forums/f47/)
-   -   Why did wooden ships never get much beyond 300 feet... (https://www.cruisersforum.com/forums/f47/why-did-wooden-ships-never-get-much-beyond-300-feet-165533.html)

reed1v 06-05-2016 05:51

Re: Why did wooden ships never get much beyond 300 feet...
 
[QUOTE=boatman61;2114100][QUOTE=reed1v;2113835]Evidently your "scholars" probably spend too much time at the bar and not at the books. As far as your "eastern" training, suspect the old latin units(adopted by the Romans later on) had equivalency in ancient India's civilizations. Many of the ancient Buddhist temples(predating the Hindu influence) followed geometric measurement series very similar to what was employed by the ancient Greeks, and interestingly, by the ancient Persians.
QUOTE]

Ahahahaaa... you've just shot the pulpit your preaching from.. :biggrin::biggrin::biggrin:
Guatama Buddha was a Hindu prince who foreswore his heritage and went walkabout.. Buddhism and Jainism sprang from the roots of Hinduism and the belief in Brahman and Vishnu which predate Buddha by over 1000yrs
[Quote] Go back to School
Was referring to the temples built prior to Bhuddism becoming absorbed into the dominant Hindi culture and thus reflecting that in a change in temple designs.

Slip Aweigh 07-05-2016 17:32

Re: Why did wooden ships never get much beyond 300 feet...
 
Look up "Vasa" the Swedish vessel. It is most impressive to see in person. ;-)

nicholson31 09-05-2016 03:21

Re: Why did wooden ships never get much beyond 300 feet...
 
1 Attachment(s)
I would say Anywhere from around 50 to 100' was typical for this area, predominantly fishing based. This allowed for access to a many harbours for transferring product and safe anchorage. 400' hulls would not be of any benefit in this industry and I would say holds the same for others.
This would be Difficult to do this with a 400+ foot hull but easily performed on a 100 ' or less boat and by a handful of people anywhere.

reed1v 09-05-2016 05:08

Re: Why did wooden ships never get much beyond 300 feet...
 
Quote:

Originally Posted by nicholson31 (Post 2116016)
I would say Anywhere from around 50 to 100' was typical for this area, predominantly fishing based. This allowed for access to a many harbours for transferring product and safe anchorage. 400' hulls would not be of any benefit in this industry and I would say holds the same for others.
This would be Difficult to do this with a 400+ foot hull but easily performed on a 100 ' or less boat and by a handful of people anywhere.

Thanks for the picture. Beach hauling was the norm about 100 years ago for most commercial sailing vessels. Seldom done nowadays.

leftbrainstuff 09-05-2016 05:16

Re: Why did wooden ships never get much beyond 300 feet...
 
Timber material properties are not the limiting factor.

Manufacturing and supply chain inefficiencies with timber limit its use. The brits pretty much exhausted their supply of oak in the late 1700s. The same occurred for yew for long bows much earlier. This shortage, in part, allowed the iron and eventually steel driven industrial revolution.

Much of the innovation was driven by defence. Here timbers material properties, principally toughness and hardness are vastly inferior to modern steels in terms of ballistic protection.

If you're building small ships with low tech tools, and you can source your timber locally, then timber is a great option.

To meet modern codes and to be able to demonstrate compliance, without extensive testing then you would find timber to be uncompetitive to steels. Mainly due to its variability from lot to lot.

Sent from my SM-N900T using Cruisers Sailing Forum mobile app

leftbrainstuff 09-05-2016 05:32

Re: Why did wooden ships never get much beyond 300 feet...
 
Quote:

Originally Posted by Slip Aweigh (Post 2115197)
Look up "Vasa" the Swedish vessel. It is most impressive to see in person. ;-)

Except it sunk because of instability. Several more successful vessels were built aftee the Vasa.

Sent from my SM-N900T using Cruisers Sailing Forum mobile app


All times are GMT -7. The time now is 18:43.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.