Cruisers & Sailing Forums (https://www.cruisersforum.com/forums/)
-   Engines and Propulsion Systems (https://www.cruisersforum.com/forums/f54/)
-   -   Removing Pick-Up Tube From Moeller Poly Tank (https://www.cruisersforum.com/forums/f54/removing-pick-up-tube-from-moeller-poly-tank-152374.html)

Delancey 02-09-2015 06:58

Removing Pick-Up Tube From Moeller Poly Tank
 
Hi Folks, awhile back I read elsewhere on a different thread I cannot now find where someone recommended removing the metal screen from the bottom of the pick-up tube on a Moeller poly fuel tank when used with diesel so that it doesn't get gunked up. I am just curious to know what I am getting into before I start.

Is there a nut molded into the poly tank that receives the pick-up tube fitting?

Also, there appears to be some kind of clear thread sealant at the fitting I don't recognize. Anyone know what that is?

I remember from the other thread someone saying Moeller offered basically no customer support.

Thanks!


All times are GMT -7. The time now is 10:27.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.