Cruisers & Sailing Forums (
-   Marine Electronics (
-   -   DST800 in a D800 housing (

travellerw 12-07-2015 07:59

DST800 in a D800 housing
I'm wondering if anyone knows if a DST800 retractable transducer will fit in a D800 retractable housing.

My boat is equipped with a D800 from an old Raymarine ST60 install. I hoping the new DST800 will fit in that housing so I can avoid a haulout until a later date.

I eventually plan a haulout and will change the housing and remove the other thru-hull but it won't be for a few months.

travellerw 15-07-2015 09:46

Re: DST800 in a D800 housing
I wanted to answer my own question as this seems like it could be a fairly common thing in the future. Many boats run ST60s that came with the D800 sensor.

In any case. I contacted Airmar and they confirmed that Yes, the DST800 should fit in the D800 housing just fine. I haven't tried yet and will update once I actually do it.

All times are GMT -7. The time now is 03:14.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.