Cruisers & Sailing Forums (https://www.cruisersforum.com/forums/)
-   Marine Electronics (https://www.cruisersforum.com/forums/f13/)
-   -   Raymarine ST 2000 (https://www.cruisersforum.com/forums/f13/raymarine-st-2000-a-147109.html)

Compactorguy 30-05-2015 21:16

Raymarine ST 2000
 
I have a Standard Horizon Matrix AIS Gx2150, and Garmin 441s that communicate using NMEA 0183 high speed on Garmin port 1. But I can't get the Raymarine to receive data from port 2 on the Garmin 4200 baud rate any suggestions


Sent from my iPhone using Cruisers Sailing Forum

Beausoleil 01-06-2015 08:27

Re: Raymarine ST 2000
 
Make sure you configure the Garmin 441 to output the correct NMEA sentences which the ST-2000 tillerpilot can recognize. The recognized sentences are listed in the AP manual on page 47 (at least in the March 2006 version of the manual). And make sure the 441's bit rate (baud rate) is set to 4800 bps, not 9600.


All times are GMT -7. The time now is 15:31.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.


ShowCase vBulletin Plugins by Drive Thru Online, Inc.