[SOLD] Yanmar SS Riser/Mixing Elbow

[kenbo]

This 6" riser/mixing elbow will fit the following Yanmar engines:

• 3JH2
• 3JH3, 3JH3E, 3JH3CE, 3JH3E-YUE, 3JH3E-YEU-E
• 3JH5E
• 4JHE
• 4JH2E, 4JH2CE

It is made from TIG welded 316SS and has some nice features such as:

• heat wrap is already installed
• it has a 1/8" NPT half coupling welded near the flange for an exhaust temp thermocouple or back pressure measurement.
• the water injection is on "the downhill" side of the riser so water cannot enter the exhaust manifold.

It accepts 2" wet exhaust hose and the bolt hole circle for the flange is 80mm.

I'm asking $125 plus shipping.