[SOLD] Yanmar 3GM Engine Parts

[Pirate007]

I have a few parts left from a 3gm that had a frozen block and was stripped for parts. Items appear to be in good visual condition but no guarantees or warranties apply.

- Raw/sea water pump requires a new impeller, O-Ring and gasket, as well may be prudent to replace the shaft seal. No play in shaft when turned by hand. Includes pulley and bracket.
Johnson Pump AB
F4B-903
10-24509-01
0325

- Injector pump and injectors look ok but should be checked and cleaned by an engine shop. Includes fuel tubes and fittings.
Yanmar Injector Pump
728374-51101
1861 2K18 P029

- Fuel pump has good suction when mechanical lever cycled.

- Coolant water/anti freeze pump looks good and comes with a water temp sensor. Includes engine mount housing and pulley.

- Wiring harness looks good and no signs of corrosion.

- Fuel filter housing looks good including the filter element.

Prefer to sell these items to someone in the Tampa Bay (Bradenton) area who can look them over before purchase however will sell and ship with a no return/guarantee policy.

Make a reasonable $ or trade offer for some or all of the items. I can send select pictures if interested.

[Captndave1]

would be handy for spares, would fifty bucks for all be a reasonable offer?

[Badsanta]

Will it fit the 3gm30f?

[Pirate007]

Captndave 1 - really?

Badsanta - Parts came from a 3GM30 fresh water cooled internal engine and raw water pump. The heat exchanger has been sold. Part number for the raw pump and injector pump provided so you can cross reference to your engine part numbers. I would assume the other parts are common to all 3GM series engines but you would need to determine.

[frankv1205]

Would you have the air filter housing?

[RLaird]

Pirate,

Any idea of the engine hours, assuming these are generally original parts?
I would take the leftovers.
Boats are on the Chesapeake but I am near Philly. Relatives in Tampa but rather not bother them to ship, so if you would be willing to handle?
Consider $175 plus $25 freight?

Let me know what you think.
Thanks,
Rob

[madiad1]

I am in Port Charlotte and would love to buy all of these spares. I can be there tomorrow to take a look and make you an offer of at least $200. You can email me directly. Dan.madia@mac.com