I have a few of these units I don’t need. They are brand new and I have most
installation parts.
Exhaust lines, pumps, reservoirs,
wiring harness all clamps and silicon hoses etc etc. You will need switch/thermostat controls,
exhaust outlet like a
thru hull,
water lines to small rads and fans in each compartment you want to heat and other
installation parts relevant to your
boat.
Top of the line German made units run on 24v with low draw and eat about 1/4 gal of
diesel an hour at full throttle. They are 9kw or about 30,000 btu. I read they will heat a 42 foot
boat but I’m guessing that depends where you are,
insulation etc.
I’d like $1,700 plus
shipping but willing to listen to your story!