For Sale or Trade: Turnbuckles, sta-Lok eyes, toggles for 3/8"

[KP44]

I have about 12 large turnbuckles for 3/8" rigging. (I think the pins are 5/8.)
Several new sta-lok eyes for 3/8".
And 4 sta-lok fitted turnbuckles for 3/8".

All at a fraction of the new price. I re-rigged and these were extras or unused and I do not need them. Hope to find someone who needs them.

Located in Arizona, USA, and can ship to anywhere.

[freshalaska]

Could you show a picture of what you have and give prices please. Im doing a rerigging with 3/8 wire and most likely can use some of your rigging.

[KP44]

It's >snowing< here right now - in Arizona. 'Soon as I have the sun back in the sky, I'll spread these out and take some photos. I don't even remember what I have but I bought good sta-loks and then installed swaged rigging.
I helped re-rig a Bowman 49 with sta-loks and was impressed at the ease and dependability, so I had planned to use them on our KP46.

[freshalaska]

Okay thanks for the reply and I'll wait for the pictures to make sure I don't buy what I don't need. Sweating my hind end off here in Florida.

[KP44]

Original add said:

Originally Posted by KP44

I have about 12 large turnbuckles for 3/8" rigging. (I think the pins are 5/8.)
Several new sta-lok eyes for 3/8".
And 4 sta-lok fitted turnbuckles for 3/8".

Here is a better accounting and some prices:

All for 3/8" rigging.

10 large turnbuckles with toggles on both ends. $400.00
3 turnbuckles with sta-lok (one end) and toggles. $120.00
1 turnbuckle with sta-lok and eye. $40.00
7 sta-lok with eyes. $210.00

Will pay shipping if you buy the lot.


Also have a big hydraulic backstay adjuster for 3/8" rigging. I bought it used and never installed it. I have no use for it now. $75.00 + actual shipping

[LeaseOnLife]

can you make sure the eyes are all 5/8" ? I am interested in the 7 StaLok Eyes and the 3 turnbuckles with toggles on one side and StaLok on the other side.

Dirk

[freshalaska]

I think the only thing I can use is the 3 turnbuckles with sta-lok one end and toggle the other end as long as they are 5/8 toggles. So I will take them if not already sold.
You can email at mfreshwaters@gmail.com

[KP44]

Originally Posted by LeaseOnLife

can you make sure the eyes are all 5/8" ? I am interested in the 7 StaLok Eyes and the 3 turnbuckles with toggles on one side and StaLok on the other side.

Dirk

They are the standard for 3/8" rigging. I tried a clevis pin that is 5/8" and it fits. I looked online and they do make one with a 3/4" eye but these are all 5/8" eye.

[LeaseOnLife]

I take the StaLok eyes and would take the three turnbuckles with Stalok too.

Dirk

[KP44]

All the sta-loks are sold.

The 10 big turnbuckles with toggles on both ends are available. These are made for 3/8" wire and in good condition. From a 16 ton boat rigged in Australasia. I think they are a steal at $40 each and they will probably fit into a medium flat-rate box.

The backstay adjuster is available. I bought it used and never installed it. It is just sitting around and if someone likes racing, you'll want this. For 3/8" wire, so very heavy duty. $75 and you pick up or pay shipping.

[KP44]

Also - I still have one turnbuckle with sta-lok for 3/8" on one end and a 5/8" eye on the other end. This works as a backstay or forestay eye. Or could be used for a running back or staysail stay. $40 and you pay shipping.