For Sale: Navico Corus Repairs and Spare units

[thlamers]

Navico Corus repair service and spares, instruments and Pilots.

Tom LaMers
777 Dayton St.
Yellow Springs, Ohio 45387 USA
(01) 937 767 9187

[TiberianSun]

Hi Tom,

We have a old Moody 376 sailboat with Navico Corus instruments.
One instrument is not working, this was set to display speed, it is a C600AD.
It shows nothing on display and if i loop through the mono cable the other displays only showing C600AD and no data.
The other Displays only works if i take the broken C600AD out of the CAN bus.
Do you have a spare C600AD display or can it be repaired?
Or is it possible to put another display from a different manufacturer for its place?
I think the CAN bus in newer instruments are not the same but maybe there is a converter possible?

Additionally our anemometer on mast top is fly away, this was also a Navico Corus.
The instrument seems to work.
Have you anemometer for the Navico Corus system or is there another solution to fix this.

Thank you very much in advance.

Best regards
Barbaros

[thlamers]

I can supply the items you require, a Navico C600AD and a ATM601 wind transducer.


Contact me at tlam45387@aol.com for details.


Sincerely,


Tom LaMers

[MBowick]

I know that this post is ancient, but is there any chance you have or know where I can find a Navico Corus autopilot computer?

Thanks, Mike

[thlamers]

Is this the Navico OceanPilot OCC1 model or is it the TillerPilot or WheelPilot type?


Tom LaMers
777 Dayton St
Yellow Springs, Ohio 45387 USA
937 767 9187

[mhawken]

Hi Tom
Are you still active in Corus instrument repair/replacement? I have a C400M which is fully functional but the LCD screen has deteriorated to a point that day time reading of depth and speed is very difficult. Any suggestions?
Many thanks in advance if you are able to help. I am based in Sydney.
Matt

[thlamers]

Your Navico C400M can be fitted wih a new LCD display. Contact me: tlam45387@aol.com or call (01) 937 767 9187 for details.


Tom LaMers