[SOLD] Martec Folding Propeller

[Andy Bassman]

Used Martec two blade folding propeller. Right hand, 14", 10 pitch as seen in photo of mfg stamp RH14DX10P-2. Fits on one inch shaft. Will clean up ok with a wire wheel brush. $125 plus $15 shipping USA.
If interested please send me a private message for more info. Thanks.

[fstbttms]

So what- there's a piece of shafting stuck in the hub? What's that about?

[Andy Bassman]

The piece sticking out of the hub is the old shaft that has been cut off from the prop.

[fstbttms]

Originally Posted by Andy Bassman

The piece sticking out of the hub is the old shaft that has been cut off from the prop.

Obviously. The question is; why is it there? Did you steal the prop? 🤣

[JC Reefer]

Oof, if the shaft needed to be cut to get the prop off the. Your gonna have a tough time gluing it on to the next shaft.

All joking aside, I’d start with a week long vinegar bath, then a vice and torch, water sprayer, some Pb blaster and a bottle of rum.

[lonesoldier0408]

Originally Posted by JC Reefer

Oof, if the shaft needed to be cut to get the prop off the. Your gonna have a tough time gluing it on to the next shaft.

All joking aside, I’d start with a week long vinegar bath, then a vice and torch, water sprayer, some Pb blaster and a bottle of rum.

Lots of Rum.!!!!!

[cdabney]

Do you still have prop?