Maretron EMS100 Converter Module
Interface Harness Part Number: EMSYRM01
4M Extention Wire Harness Part Number: 129574-77710
& User Manual
EMS100 System Description-
Maretron's EMS100 connects into engine wiring
harnesses and converts analog signals such as water
temperature and oil
pressure to the new marine
digital interface NMEA 2000
. Engine data is then distributed throughout the vessel over a single
cable where it can be monitored by any NMEA
2000 compatible display.
The EMS100 supports these engines-
Yanmar GM Series
Yanmar YM Series
Yanmar JH Series
Yanmar LH Series
Yanmar LP Series
Yanmar LY Series
This EMS100 is compatible with existing instrument panels
and key switches so you don't need to remove them while upgrading to newer digital technology. For new installations, the EMS100 and a compatible NMEA
2000 display can replace the traditional analog instrument panel.
Yanmar Harness Maretron Part Number: EMSYRM01
This EMS100 wire harness connects between the engine and instrument panel. Most modern Yanmar engines use the rectangular Yazaki connector, but you should verify the type of connector prior to considering purchasing
this EMS100 or associated wiring
Also included is a Yanmar 4M Extention Wire Harness Part Number: 129574-77710 (JH, LH, LY Series)
This harness may or may not be needed for your installation
but is included.
This kit is being sold
as new, open box as it does not show any signs of ever being installed,
The original box was no longer serviceable and was discarded.
for kit is $450.00 shipped via USPS.
Payment via Paypal.
Thanks for looking....