Want To Buy: Engine bracket for Yanmar 3gm30/2gm20

[Valkyrie_E35]

Need one of these for repower project:

Yanmar engine mount bracket, part no. 128170-08100. For 3GM30 and 2GM20 series.

Please let me know if you have one! some of the parts houses list it but then cancel order saying No Longer Available. I'm sure there are a lot of broken parts motors out there that have one to spare.

Thank you!

[Bellinghamster]

If no luck, that's a really simple/easy part to have made by pretty much any machine shop. Especially easy if the one you need is a duplicate of one you have and they can use it as a pattern.

I made new, slightly longer ones that were considerably more complicated for my 4JH4TE repower. Mine were different for R and L sides (had to joggle around the water pump on one side, cut out around the injection pump and oil cooler on the other.)

I'd guesstimate under an hour labor and $10 in material to make yours.

[skipperpete]

If you were in Langkawi, Malaysia you could have one for free….I know a guy who has a box full of em, but judging by the tape measure I figure you might be in the US so that offer would be of no help at all, the freight out of Langkawi is more expensive than a new bracket from Mackboring in US. If you’re in Australia, I have a good set of engine mounts.