Visit our Popular Forums

Sabre 30 · 21-11-2024, 12:27

Hey, Does anyone out there have a flexible shaft coupler (drive saver) similar to the one attached? Its a 404v
I would be interested in buying.
Thanks. Jim.

Patrick of M · 21-11-2024, 13:11

I have one, but doubt they always have the same spacing/dimensions. Or maybe they only made one size?

Sabre 30 · 22-11-2024, 05:01

Hey Patrick,
If you could measure the hub size thats the recess on one side and the protrusion on the other side, over all outer diameter, thickness and center to center of the bolt holes that would give me a good indication of fitment. Lastly a coulpe of pictures of the measurements when taken so I can determine fitup.
Thanks.
Jim.

Patrick of M · 22-11-2024, 14:23

Ok, I'll be in my shop this weekend..... hopefully it is there, as otherwise it's at the boat and I won't be there until next week

Sabre 30 · 23-11-2024, 04:12

All good, no sailing up here this time of year.

wholybee · 23-11-2024, 09:02

The 404v is the Volvo version with metric bolts and spacing to fit volvo couplers. It is a non standard item. I have one, but not for sale. Despite all the on-line places saying they are not in stock, go ahead and order one. They are made to order and ship pretty quick, or at least mine did. Unless you don't have a volvo engine/coupler. In which case don't get the 404v.

More expensive than it should be, however.

Sabre 30 · 23-11-2024, 11:54

That is correct Warren, I have two folks that have one and are looking promising. I would never pay the new asking price, I have repaired my old one but if reasonable I would like to have a spare.